PDA

View Full Version : Need Jack Plate

Burger
13-01-2005, 07:39 AM
... just a try ....
anyone has a used Jack Plate that will take a 200HP engine (Merc) for sale? :cool:
I've been looking around a bit, but there is not really a big market on this side of the big pond. :cry:

If you have a good source in Europe for new ones that's welcome as well. Unfortunately the ones I found so far were kind of pricy compared to the US.

Importing all the stuff is lying heavy on my wallet as well.
Burty
13-01-2005, 07:56 AM
what do you want hydraulic or manual?

if manual i may know of a CMC 5 1/2 " manual one

or if you want Hydraulic then contact Cyco because he got me a brand new CMC.

Check you Private messages for Cyco's number
Tony Davis
13-01-2005, 07:58 AM
I think Gavin Brown has/had one for sale.

http://www.boatmadforum.co.uk/showthread.php?s=&threadid=1530
JamesM
13-01-2005, 10:06 AM
The dodgy lookin geezer in the attached photo told me he had two 'Land and Sea' jackplates in his work shop. I think he said £500 each. That may seem like a lot but 'Land and Sea' jackplates are the bollox and are well over a grand new!!!

I'm sure some here knows his Boatmad name so you can pm him if you want one.
Gav
13-01-2005, 10:07 AM
The Grinch
Jon Fuller
13-01-2005, 10:37 AM
Originally posted by Gav
The Grinch

That's him, he's a right nob end!
Gav
13-01-2005, 10:42 AM
Originally posted by Jonny
That's him, he's a right nob end!

i think you are on his hit list! i saw that photo being taken an he'd been staring at you like that for ages:speechles :eek: :bolt:
Jon Fuller
13-01-2005, 10:49 AM
Originally posted by Gav
i think you are on his hit list!

Bahhhh, he's a northern pussy!
Gav
13-01-2005, 10:59 AM
Originally posted by Jonny
Bahhhh, he's a northern pussy!


:well:

yeah bloody midlanders! :laugh:
CB1
13-01-2005, 11:28 AM
I have recently been in contact with Stainless Marine in the USA. Their lifters are very competively priced with the exchange rate at the mo. Looking at £625 including tax and shipping for lifter minus pump. Not a bad price. If you are watching the pennies I have the one Im replacing which needs some work. Pm me and I'll give you my details.
Gavin Brown
13-01-2005, 11:46 AM
yes i have a good 2'nd hand CMC HYD complete with pump relays switch etc, would like around £450.00 see what the feed back's like, might use it my self or the magic ebay,any takers? :frown:
Gav
13-01-2005, 01:00 PM
is that the one Pete had?
Burger
14-01-2005, 05:30 AM
Wow, more than I expected. Thank you... how much setback would you suggest for my setup (p21 with 200HP Merc 2.5) ?
Jon Fuller
14-01-2005, 06:42 AM
none
Captain Chaos
14-01-2005, 07:13 AM
is that metric or imperial?
Burty
14-01-2005, 09:27 AM
Originally posted by Burger
Wow, more than I expected. Thank you... how much setback would you suggest for my setup (p21 with 200HP Merc 2.5) ?

I run 7.5" on my P20 and all is well

a standard CMC jack plate is 5.5"

a second hand manual lift shouldn't cost more than 150 to 200 quid
JamesM
14-01-2005, 10:12 AM
you have 8" setback dude 5.5" + 2.5"
Burty
14-01-2005, 10:15 AM
Originally posted by Johnny Boat Dude
you have 8" setback dude 5.5" + 2.5"

Do I??? thought the extra pieces were 2":confused:
JamesM
14-01-2005, 10:16 AM
nope, 2.5
Burty
14-01-2005, 10:21 AM
Originally posted by Johnny Boat Dude
nope, 2.5


Durrrrrrrrrrrrrrr!

I know its a 2.5 engine bolted to it but what size is the spacer?:confused: :confused:
JamesM
14-01-2005, 10:44 AM
nob
Burger
14-01-2005, 11:18 AM
is that metric or imperial?

Guess the right question would be is that a yankee or brit statement....
Burty
14-01-2005, 11:20 AM
Dude phone cyco i pm ed you his number he has a manual lift for sale
Gavin Brown
16-01-2005, 06:21 AM
Originally posted by Gav
is that the one Pete had?


yep!:)