engine set up?

[scottyboy]

Rite guys most of you are phantom owners! how much offset should give my engine and how much jack? ive got a manual jack plate so i can muck around with it but i want a good basic setting for the first run! oh and wot prop is a good one to go for as ive gota buy one? ive got a phantom 21 tandem deck running an xr2!:cheers:

[Burty]

engine slap bank in middle (everything else mounted back right ie trim pump battery etc)

start with prop shaft around 3" below transom until you get used to it but make sure you can jack up to at least level for calm days
remember the higher the engine the worse the hole shot will be

try a laser as they seem to be a good all round prop and the most forgiving

[scottyboy]

why does everyone offset the engine ?

[Gav]

Originally posted by scottyboy
why does everyone offset the engine ?

Prop torque!

[scottyboy]

so surely its better to offset it then?

[Silversurfer]

Mines offset get it back on Sunday can measure it if you like then

[Burty]

Originally posted by scottyboy
so surely its better to offset it then?

Better drive with it mounted in the centre anyways if you offset all the other weight and have hydraulic steering you wouldn't notice anyways

[scottyboy]

silversurfer can you measure it and let me know!

[Gav]

usually approx 1"

[Carl]

i think from memory the revolution had about 2",i remember thinking it was alot,but the boat went well with that set up

[Jon Fuller]

1" per 100hp

[TheMutzNuts]

What steering have you got burty? still the twin cable or seastar hydraulic ?

[Burty]

Originally posted by TheMutzNuts
What steering have you got burty? still the twin cable or seastar hydraulic ?

Hydraulic, Capalleni helm, marine machine side ram