50 Footer With 2400hp

[JASON]

This is another creation I tried with a turbine 2x400hp volvos+1600hp gas turine all this I a 50' france marine powerboat it weighed in at 10 ton.

[Jon Fuller]

How quick did the 50 go?

Looking at the pic, I assume you re-located the intercooler/heat exchanger on the port motor?

[Jon Fuller]

Looks like a beauty to work on:aaahhh:

[JASON]

The boat only toped out at 55mph due to the diesel engines running out of steam to keep up with the turbine, I needed to use 2 speed tranies on the diesels when the turbine was running but the cost was crazy for the ZF units and I ended up abandoning this project for a while until the scarab is complete.

[JASON]

The intercoolers were moved to make room for the turbine those big Volvos weigh about a ton each for 400hp, the turbine weighs 300kgs for 1600hp and 1600Lbs feet torque @ 6000 rpm at the output shaft.

[Captain Chaos]

but why 2 x diesels and a tuebine?

or is that the whole point!

[Jon Fuller]

I would guess that the boat is nice to use with twin diesels for everyday stuff, pottering about and manouvering, then light the big fire for getting a move on when you're going places, over to you Jason.

PS. what's a "tuebine"? and can you get a thubine, or a monbine, or even a sat/sunbine! :D

[JASON]

Yep Jon’s right diesels for economy and getting around the dock set all three away to get on the move and cover large distance more quickly plus one hell of a good noise!

[Jon Fuller]

Just how noisy is it exactly?

[JASON]

Most of the noise is from the intake when we run it in the garden it was about 130-140 db (sounds like a jet fighter on take off) By the way exhaust gas temp is around 600 deg c no need for a BQ on this boat.

[Captain Chaos]

honestly Jon,

I can spell.....i just type too fast & like a mongo!

And considering the familly business,the above statement is slightly way too un PC!

:down: :wotzhapni

[Jon Fuller]

WTF are you doing up at 4.22am?

[catmando]

Originally posted by JASON
The intercoolers were moved to make room for the turbine those big Volvos weigh about a ton each for 400hp...

You would save close to 1600lbs. if you could locate a couple used Yanmar440s. They weigh right at 1200lbs. each.


...the turbine weighs 300kgs for 1600hp and 1600Lbs feet torque @ 6000 rpm at the output shaft.

Who built that motor? Do you use surface drives on all the engines?

[JASON]

I did all the engine work and rigging myself the drives I used were arneson ASD8 surface drives with rolla props

[JASON]

Scarab is getting there but very slowly every single part has to be custom made just had one piece shaft made to couple engine to gearbox and kevlar blanket to wrap around hot section incase it goes BANG!

[JASON]

Anybody want to by my 50'footer? Its up for sale without the turbine.
Any interested parties drop my a line

[Captain Chaos]

Cant afford the 50..............but i'd love to know who done the graphics

[JASON]

I run my own printing company we done all the design and graphics in house

[Captain Chaos]

PM your contact details please

[JASON]

Drop me a email jason@screenservices.co.uk

[Admiral P. Brain]

where did you get the drives from? how much are they worth?

[JASON]

Speak to arneson industries there on the web I think you could be looking at about $18,000 pair for asd8s

[Captain Chaos]

Jason.........I'll email you once i'm @ home!

thx