Stainless fire surround....

verytricky · 31-07-2006, 05:00 PM

I forget who, but someone on Boatmad can 'do' stuff with stainless steel.

I want a fire surround for the fireplace I am rebuilding. It will be stainless, about 4mm thick about 4 foot by 2'6" with a 3' by 1'8" cutout in the middle. It will need 6 'pegs' to embed it into the wall, and would be brushed stainless finish..

Dan · 31-07-2006, 05:09 PM

I can do that no probs. When you say pegs do you mean like a weld stud?
Cheers
Dan

verytricky · 31-07-2006, 06:12 PM

I am not sure what I mean!

I want to drill holes in the wall, fill the holes with a two part compound, and insert the 'frame' of the fire. The two part sets, and the frame is in place.

I will take a picture tonight, and post it, along with the concept.

Dan · 31-07-2006, 06:51 PM

No probs, studded bar would work fine with chem fixing like you said. If its strong enough to hold balustrade fixings in it would be just fine for your surround

verytricky · 02-08-2006, 11:48 AM

BluFin · 02-08-2006, 12:12 PM

Kor for a moment at the start I thought you were going P1 with a CUV

michaelcaine · 02-08-2006, 06:10 PM

Quote:

Originally posted by Dan
If its strong enough to hold balustrade fixings in it would be just fine for your surround

[/B]

it certainly is,it took my weight whist i hung off the rachet fixing standards!!