Looking for really thin thru-hull

quantz · 22-03-2006, 09:49 PM

My 1996 Trophy 2352 uses a pair of really thin Thru-Hulls for draining water from Helm. They are only 1/2 inch of hull drill. (not 1/2 inch thru-hull, that are much more big).
I can not find something similar.
Help would be very appreciated.

Matt · 22-03-2006, 10:38 PM

http://www.asap-supplies.com
Choose Intakes & Exhausts|Through Hull Fittings, anc take your pick. They appear to go down to roughly the size you need.

quantz · 23-03-2006, 12:35 PM

Matt,

Thanks for your reply.
None of items available at ASAP-Suplies seems to fit. I thought the same, but a 1/2 inch thru-hull is 1/2 inch interior hole diameter. What I need is 1/2 inch exterior diameter (hole in hull is 1/2 inch).
They are really thin. Used to drain helm glove compartment.

Any help would be very appreciated.

Tanks.