CLE shift shaft / seal

[Paul E]

Oil has been pissing out of the weephole on my gearbox (the little hole next to the vent plug)

A quick search on here and S&F has told me that the shift shaft seal is knackered, which makes sense (the gear oil is fresh, only a few quick runs, I drained it and it was slightly milky so there must be water getting in too). Does anyone have a part no. for the seal? I noticed too that the shaft itself has a bit of play, you can grab the splines and it moves up and down about 10mm - is this normal? Is it a simple job?

Thanks

Paul

[sean1982]

http://www.mercruiserparts.com/Show_...sp?dnbr=817087 90&ivar=images/HIPERF/817087.90/31.png&inbr=1510&bnbr=160&bdesc=GEAR+HOUSING+%28DR IVE+SHAFT%29RHR+2%2DHOLE+WATER+PICK%2DUP

http://www.mercruiserparts.com/Show_...sp?dnbr=817087 90&ivar=images/HIPERF/817087.90/33.png&inbr=1510&bnbr=170&bdesc=GEAR+HOUSING+%28PR OPELLER+SHAFT%29RHR+2%2DHOLE+WATER+PICK%2DUP
have a look at those mate

[Paul E]

the links don't work mate

[Dan]

Originally Posted by Paul E

the links don't work mate

Paul, if you copy and paste the whole address into the search bar it works ok. Trying to paste a link but am struggling.
Cheers
Dan

[Dan]

Sha-ting (said in Keith Lemon style)

http://www.mercruiserparts.com/Show_...+HOUSING+%28DR IVE+SHAFT%29RHR+2%2DHOLE+WATER+PICK%2DUP


http://www.mercruiserparts.com/Show_...+HOUSING+%28PR OPELLER+SHAFT%29RHR+2%2DHOLE+WATER+PICK%2DUP