Thanks guys!
you are more than welcome to write in english at our site. :-)
We bought a 199 from new in 1991 and the first guy who made the holes in the transom was the guy who mounted the yam on it and not fletcher.
The engine has to be out of centre , about 1,5 " to the right, if engine is bigger than a 90hp outboard.
Some years ago i wrote with Troels, who is also in here. He talked to guys at Fletcher who told him that 120 were made.
A 199 has been weighed and overall weight with trailer, fuel and some stuff was around 1150 kg.
The Transom is too low for excessive highspeed handling if you dont have a lift.
Best regards!
Andi