moorse 2 dual ride glide

[freedom]

in the process of changin my steering from single moorse too twin ride glide
just out of intrest having trouble mounting it to the dash
made a custom plate my self, but wondering if theres any particular way you should go about doing it
basically my previous sytem had a big plasic cover, where as this just has the metal helm where the wheel bolts too.
any tips would be greatly apreciated cheers

[Burty]

do as i told you earlier on phone, see i told you that you didnt listen

[freedom]

having trouble mounting it to the dash
made a custom plate my self, but wondering if theres any particular way you should go about doing it


see i do listen

just didnt seen right thats all, didnt look sturdy enough and seeing as it me steering and dont wanna loose me wheel in the middle of the sea, wondered if theres any way of doing it properly, or if this was it.

[Cyco]

If you feel that the Helm is mounted tight on the dash but there is still to much movement try fitting a rose jointed tie bar to one of the vertical uprights from the back of the helm unit, this will allow the dash to move with the boat but also stop the dash board form flexing.

Cyco