|
11-05-2013, 10:58 AM
|
#1
|
Registered User
Boat make: avenger21 -ring 21- lorne campbell cat- phantom20- phantom21
Cruising area: south coast
Join Date: Mar 2010
Posts: 41
|
water pressure
hi , I want to fit a water pressure gauge to a 90hp Yamaha, does any one know where the small male brass fitting that came with the kit screws in to the block to take the tubing.............thanks!
__________________
|
|
|
11-05-2013, 05:24 PM
|
#2
|
Registered User
Country: Belgium
Location: near Ghent
Occupation: engineer
Interests: boating, wakeboarding, snowboarding, fitness
Boat name: Outlaw
Boat make: Phantom 21ft
Engines: Yamaha 200hp
Cruising area: Zele / Kanaal Gent-Terneuzen
Join Date: Jun 2006
Location: near Ghent
Posts: 473
|
Sadly, I don't know the answer, but I have like the same question for my V6 2.6 200hp, so I'm following this thread
__________________
|
|
|
11-05-2013, 06:35 PM
|
#3
|
Registered User
Country: UK
Location: Cowes,Isle of Wight.
Boat name: B-52
Cruising area: The Solent
Join Date: Aug 2006
Location: Cowes,Isle of Wight.
Posts: 99
|
W/P Plug
Hi , Unscrew the plug (90340-14M00-00) located between the top and middle cylinder on the cylinder head on the left , not on the cover. The plug has an orange fibre seal ( 90430-14115-00 ) , although will probably been painted over from the factory. Does look like a fixing bolt , but is indeed a plug ! 14mm hex i think.
|
|
|
11-05-2013, 07:12 PM
|
#4
|
Registered User
Boat make: avenger21 -ring 21- lorne campbell cat- phantom20- phantom21
Cruising area: south coast
Join Date: Mar 2010
Posts: 41
|
Quote:
Originally Posted by gap52
Hi , Unscrew the plug (90340-14M00-00) located between the top and middle cylinder on the cylinder head on the left , not on the cover. The plug has an orange fibre seal ( 90430-14115-00 ) , although will probably been painted over from the factory. Does look like a fixing bolt , but is indeed a plug ! 14mm hex i think.
|
hi...thank for your reply.
have taken bolt out but seems blank sealed space once bolt removed, no access to water jacket of block for pipe to get pressure to work the gauge ,plus the fitting that came with the kit is tiny, any ideas .
|
|
|
11-05-2013, 08:16 PM
|
#5
|
Registered User
Country: UK
Location: Cowes,Isle of Wight.
Boat name: B-52
Cruising area: The Solent
Join Date: Aug 2006
Location: Cowes,Isle of Wight.
Posts: 99
|
W/P Plug
Drilling for a Temp switch sender then. My model was a 90aetol 2stroke.
2001. Will look out pictures on Monday if not sorted by then.
Have seen that plug drilled to accept a hose tail for pipe. If fitting smaller , is there a plug in the water jacket cover on exhaust side ? My plug definately had
water flow behind it.
|
|
|
11-05-2013, 08:20 PM
|
#6
|
Registered User
Country: UK
Location: Cowes,Isle of Wight.
Boat name: B-52
Cruising area: The Solent
Join Date: Aug 2006
Location: Cowes,Isle of Wight.
Posts: 99
|
W/P Plug
Another thought. Does it tee into the tell tale hose perhaps.
|
|
|
11-05-2013, 08:29 PM
|
#7
|
Registered User
Country: UK
Location: Cowes,Isle of Wight.
Boat name: B-52
Cruising area: The Solent
Join Date: Aug 2006
Location: Cowes,Isle of Wight.
Posts: 99
|
W/P Plug
|
|
|
11-05-2013, 08:55 PM
|
#8
|
Registered User
Boat make: avenger21 -ring 21- lorne campbell cat- phantom20- phantom21
Cruising area: south coast
Join Date: Mar 2010
Posts: 41
|
Quote:
Originally Posted by gap52
Drilling for a Temp switch sender then. My model was a 90aetol 2stroke.
2001. Will look out pictures on Monday if not sorted by then.
Have seen that plug drilled to accept a hose tail for pipe. If fitting smaller , is there a plug in the water jacket cover on exhaust side ? My plug definately had
water flow behind it.
|
thanks, it 1990 model picture would be a great help
|
|
|
12-05-2013, 02:38 PM
|
#9
|
Registered User
Boat make: avenger21 -ring 21- lorne campbell cat- phantom20- phantom21
Cruising area: south coast
Join Date: Mar 2010
Posts: 41
|
Quote:
Originally Posted by gap52
Hi , Unscrew the plug (90340-14M00-00) located between the top and middle cylinder on the cylinder head on the left , not on the cover. The plug has an orange fibre seal ( 90430-14115-00 ) , although will probably been painted over from the factory. Does look like a fixing bolt , but is indeed a plug ! 14mm hex i think.
|
you are right when I looked carefully there is a small opening in to the water jacket with the bolt/plug removed so thank you for your advise and have found part number for adapter...MAR-WPRES-AD-TR...to fit tubing too.
|
|
|
12-05-2013, 06:37 PM
|
#10
|
Registered User
Country: UK
Location: Cowes,Isle of Wight.
Boat name: B-52
Cruising area: The Solent
Join Date: Aug 2006
Location: Cowes,Isle of Wight.
Posts: 99
|
More Info
Found original instructions , also includes V engines ( Toffy ) and took a picture for you ! Hope your now sorted.
|
|
|
12-05-2013, 07:32 PM
|
#11
|
Registered User
Boat make: avenger21 -ring 21- lorne campbell cat- phantom20- phantom21
Cruising area: south coast
Join Date: Mar 2010
Posts: 41
|
Quote:
Originally Posted by gap52
Found original instructions , also includes V engines ( Toffy ) and took a picture for you ! Hope your now sorted.
|
your a star thanks for your help the pic, instructions have the Yamaha part number to adapt the small brass fitting I have so will order tomorrow....job done!..thanks again
|
|
|
12-05-2013, 08:26 PM
|
#12
|
Registered User
Country: Belgium
Location: near Ghent
Occupation: engineer
Interests: boating, wakeboarding, snowboarding, fitness
Boat name: Outlaw
Boat make: Phantom 21ft
Engines: Yamaha 200hp
Cruising area: Zele / Kanaal Gent-Terneuzen
Join Date: Jun 2006
Location: near Ghent
Posts: 473
|
absolutely great info !! thanks guys
|
|
|
13-05-2013, 03:17 PM
|
#13
|
Registered User
Country: Denmark
Location: The Island Fyn
Occupation: Worker
Interests: Going fast, and drinking GT's😃
Boat make: Campion 565
Engines: 300 Promax
Cruising area: Mostly around water...
Join Date: Mar 2009
Location: The Island Fyn
Posts: 369
|
Quote:
Originally Posted by gap52
Found original instructions , also includes V engines ( Toffy ) and took a picture for you ! Hope your now sorted.
|
Same procedure for a Yamaha 150 90-93'?
__________________
__________________
Present boat:
Campion 565/300 Promax
Recent boats:
Phantom 21/225 Optimax
Fletcher 199 Bravo/150 Yamaha
RING 16/90 Yamaha
Fletcher 199/200 Merury
Mustang-Trekpoint/50 Suzuki
Fletcher 161/100 Mercury
Fletcher 160/100 Mercury
Fletcher 199/200 Mercury EFI
Campion Cortes 165/200 Mercury
Global 13/50 Mercury
Selco 15/35 Johnson, 50 Mercury
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|