Boatmad.com


Reply
 
Thread Tools Display Modes
 
Old 27-05-2014, 08:30 AM   #1
Registered User
 
Location: Cornwall

Join Date: Nov 2006
Location: Cornwall
Posts: 75
Yamaha fault codes

Hi,

Yesterday a little sign of an engine started to flash on the rev counter gauge, it was flashing twice, then 8 times in a row, then twice again and repeat.

I have had a look in the manual but cannot see this mentioned, engine seems to be running fine except idling around 300 rpm more than normal. Does anyone know what this means? Engine is a Yamaha 200 hpdi.

Cheers
__________________

__________________
Coastworker 18 Old V4 Power.
Sunseeker Sports 23 2 x 200 Yamaha HPDI
oilman is offline   Reply With Quote
Old 27-05-2014, 05:34 PM   #2
Registered User
 
Country: UK
Location: Cowes,Isle of Wight.
Boat name: B-52
Cruising area: The Solent

Join Date: Aug 2006
Location: Cowes,Isle of Wight.
Posts: 99
Fault code

28 in -gear start. May have been started or cranked in gear , or not quite in neutral.
Once isolated fault code will disappear on tacho....but remain on system.
Can only be cleared with laptop YDS system in history. Not a problem ,not a must as would be done in service.
For info 13 = coil input
15 = water temp sensor
18 = tps
19 = battery + voltage
23 = air intake temp
29 = air intake pressure
33-44 computer processing info
( 33) = ign timing corrected ( cold eng )
( 37) = intake pass air leak
(44) = stop switch control operating

Hope of some interest !
__________________

gap52 is offline   Reply With Quote
Old 28-05-2014, 08:51 AM   #3
Registered User
 
Location: Cornwall

Join Date: Nov 2006
Location: Cornwall
Posts: 75
Hi, thanks, that is really helpful and I am going to make a note of those other codes just in case.

In gear start would make sense as the engine was a bugger to get in an out of gear, I have been told I need to adjust the gear shift cable. I assume I do this from the engine end.

Cheers
__________________
Coastworker 18 Old V4 Power.
Sunseeker Sports 23 2 x 200 Yamaha HPDI
oilman is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT +1. The time now is 10:21 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×