Boatmad.com


Reply
 
Thread Tools Display Modes
 
Old 30-12-2011, 03:41 PM   #1
Registered User
 
Burty's Avatar
 
Country: UK
Location: Weston Super Mare
Occupation: Electrical Engineer

Join Date: Mar 2004
Location: Weston Super Mare
Posts: 6,351
Send a message via AIM to Burty
700xs for sale

Selling my 700xs bare hull. build pictures and details can be seen here http://www.boatmad.com/forum/f4/cycos-build-thread-13359.html and more pictures here http://www.boatmad.com/forum/f4/700xs-rebuild-thread-18166.html

Selling due to some glass work needed on floor and i don't have the skills nor motovation to repair it so decided to sell.
Hull was built in 2009 with no expense spared. bow tank drain pipe broke last time out so fuel tank and floor was removed to repair it when the damage to the hull was then revealed, see pictures below

Bare boat inc. centre console £ 2000 ono priced to sell as want it gone

could come with any or all of the following depending on monies

180ltr stainless steel fuel tank (powder coated blue) with polished stainless steel clamp
Polished stainless steel transom plate (for twins)
tie bar transom assembly for extra strength polished stainless
cyco custom aluminium billet battery tray powder coated blue
cyco custom billet aluminium trim tabs (powder coated blue)with custom rams ( powder coated white) and bennett pumps
cyco custom polished stainless steel bow tank pick up
Cyco custom quad shifters polished stainless
Kings upholtsery custom brand new cover (see picture)

Other bits also possible please contact me to discuss, this is a serious advert so please refrain from asking questions other than about this boat and sale details.

Thanks for looking.
Attached Thumbnails
Click image for larger version

Name:	IMG_2358.jpg
Views:	418
Size:	99.0 KB
ID:	32894   Click image for larger version

Name:	IMG_263300.jpg
Views:	526
Size:	280.7 KB
ID:	32895   Click image for larger version

Name:	IMG_263400.jpg
Views:	522
Size:	151.5 KB
ID:	32896  
__________________

Burty is offline   Reply With Quote
Old 30-12-2011, 08:17 PM   #2
Registered User
 
deepvee's Avatar
 
Country: england
Location: surrey
Engines: none at the mo
Cruising area: south coast

Join Date: Dec 2011
Location: surrey
Posts: 472
700 xs

Quote:
Originally Posted by Burty View Post
Selling my 700xs bare hull. build pictures and details can be seen here http://www.boatmad.com/forum/showthread.php?t=13359 and more pictures here http://www.boatmad.com/forum/showthread.php?t=18166

Selling due to some glass work needed on floor and i don't have the skills nor motovation to repair it so decided to sell.
Hull was built in 2009 with no expense spared. bow tank drain pipe broke last time out so fuel tank and floor was removed to repair it when the damage to the hull was then revealed, see pictures below

Bare boat inc. centre console £ 2000 ono priced to sell as want it gone

could come with any or all of the following depending on monies

180ltr stainless steel fuel tank (powder coated blue) with polished stainless steel clamp
Polished stainless steel transom plate (for twins)
tie bar transom assembly for extra strength polished stainless
cyco custom aluminium billet battery tray powder coated blue
cyco custom billet aluminium trim tabs (powder coated blue)with custom rams ( powder coated white) and bennett pumps
cyco custom polished stainless steel bow tank pick up
Cyco custom quad shifters polished stainless
Kings upholtsery custom brand new cover (see picture)

Other bits also possible please contact me to discuss, this is a serious advert so please refrain from asking questions other than about this boat and sale details.

Thanks for looking.
thats cheap for a split in half boat ?
__________________

deepvee is offline   Reply With Quote
Old 31-12-2011, 12:26 AM   #3
Registered User
 
freedom's Avatar
 
Country: engalnd
Location: south west
Interests: ski racing
Boat name: Jack'd up, hellraiser
Boat make: Bernico 19 ET, ring 16
Engines: merc 135, merc 175, yam 90
Cruising area: Plymouth

Join Date: Jun 2006
Location: south west
Posts: 1,172
Definitely not split in half
freedom is offline   Reply With Quote
Old 31-12-2011, 01:03 AM   #4
Registered User
 
Country: England
Location: South West
Occupation: Development engineer
Interests: Fast boats
Boat name: Xtreme
Boat make: Bernico 21
Engines: Mercury F1, 300 Drag, XR2 "Fingerported"
Cruising area: South West

Join Date: Mar 2004
Location: South West
Posts: 1,043
Quote:
Originally Posted by deepvee View Post
thats cheap for a split in half boat ?
Great first post d**khead
Cyco is offline   Reply With Quote
Old 31-12-2011, 01:56 AM   #5
Registered User
 
Ringmaster's Avatar
 
Country: England
Occupation: I have 1!
Boat name: vodka express/smoking aces
Boat make: liberator 221/extreme 24
Engines: 7.4 v8 8.2 v8
Cruising area: Portsmouth

Join Date: Jul 2009
Posts: 455
Quote:
Originally Posted by Cyco View Post
Great first post d**khead
Makes it even cheaper then..... 2 boats for the price of 1!!!
__________________
www.carsoffareham.co.uk
Ringmaster is offline   Reply With Quote
Old 31-12-2011, 12:27 PM   #6
JORDANIEL
 
jordaniel's Avatar
 
Country: ENGLAND
Location: WEST MIDLANDS
Occupation: paying my kids bills
Interests: BOATS,MOTORCROSS,JET SKIS AND BEER LOTS OF BEER
Boat name: SIDEWINDER
Boat make: PHANTOM 20
Engines: XR2 MERCURY
Cruising area: BARMOUTH

Join Date: Aug 2009
Location: WEST MIDLANDS
Posts: 160
At least he has said what's wrong with it and shown pic's some fooking low life's would say nothing and sell it for twice as much
__________________
If It's got wheels or tits your gunna have trouble with it
jordaniel is offline   Reply With Quote
Old 31-12-2011, 03:18 PM   #7
Registered User
 

Join Date: May 2009
Posts: 496
After the amount of repairs on my Cougar, doesnít look that bad to repair for someone with a bit of experience of glassing up. If that is all thatís wrong with it I would have thought that could be repaired for £100 in materials and two days work. Iím surprise you have not done it yourself, would have thought it would make fare more money repaired. Looks like a nice boat, good luck with your sale.
PerformanceDodge is offline   Reply With Quote
Old 31-12-2011, 05:20 PM   #8
Registered User
 
Burty's Avatar
 
Country: UK
Location: Weston Super Mare
Occupation: Electrical Engineer

Join Date: Mar 2004
Location: Weston Super Mare
Posts: 6,351
Send a message via AIM to Burty
Cant do fibreglass work dude and as i said just want it gone. so if it means selling it cheap then so be it
Burty is offline   Reply With Quote
Old 31-12-2011, 05:45 PM   #9
Registered User
 
Ian Hutch's Avatar
 

Join Date: Oct 2010
Posts: 21
private message sent send me your number please
Ian Hutch is offline   Reply With Quote
Old 03-01-2012, 12:00 PM   #10
Registered User
 
Burty's Avatar
 
Country: UK
Location: Weston Super Mare
Occupation: Electrical Engineer

Join Date: Mar 2004
Location: Weston Super Mare
Posts: 6,351
Send a message via AIM to Burty
I've had a load of messages asking for more pictures of the damage with sizes etc and info of what else is available so i thought i'd list it all out.

Bare Hull including centre console £ 2000 ono

Custom 180ltr stainless steel fuel tank with sump to fit into floor. £ 100

polished stainless steel clamp for tank. £ 50

tie bar transom assembly for extra strength polished stainless £ 50

cyco custom aluminium billet battery tray powder coated blue £ 50

cyco custom billet aluminium trim tabs (powder coated blue)with custom rams ( powder coated white) and bennett pumps £ 500

cyco custom polished stainless steel bow tank pick up ( only type that will fit due to the step. £ 100

Kings upholtsery boat cover custom made 2011 £ 350

Bernico style seats, with kevlar casings £ 500

Cyco 3 way trim indicator fitted to tabs no cable or sender for engine. £ 50

cyco custom ski pole polished stainless, made to fit boat. £ 100

cyco custom polished stainless lifting eyes £ 50

loads of other little bits can be left in if required, grab handles, bilge pump, hoses, breathers, fittings etc valued at £ 350

Its basically a complete boat at the moment less engines, gauges, steering, shifters and foot throttle. Whoever buys is welcome to take whatever extras they require at the stated prices (negotiable) or if not once the hull has gone then certain bits that I don't need will be available.

I'd suggest that if you are considering buying then you should also buy the tabs, tank / clamps, bow tank pick up and maybe the ski pole as trying to get anything else to fit will be a lot more expensive than using these bits.
Attached Thumbnails
Click image for larger version

Name:	IMG_263600.jpg
Views:	242
Size:	171.4 KB
ID:	33048   Click image for larger version

Name:	IMG_263700.jpg
Views:	199
Size:	232.6 KB
ID:	33049   Click image for larger version

Name:	IMG_263800.jpg
Views:	280
Size:	173.2 KB
ID:	33050   Click image for larger version

Name:	IMG_263900.jpg
Views:	241
Size:	142.7 KB
ID:	33051  
Burty is offline   Reply With Quote
Old 03-01-2012, 02:56 PM   #11
Senior Member
 
OCRDA's Avatar
 
Country: UK
Location: Devon
Occupation: Garage Proprietor
Interests: PowerBoat Racing
Boat name: If Only
Boat make: Bernico F3 OCR, Bernico Prototype Inboard, and some Ribs
Engines: Yamaha Pro V 115
Cruising area: UK, France

Join Date: Jan 2005
Location: Devon
Posts: 3,092
Looks very reasonable Burty !! What are you going to replace it with ??
__________________
If Only
National Outboard Immersed Propeller Mono Record 103mph
OCRDA is offline   Reply With Quote
Old 03-01-2012, 03:13 PM   #12
Registered User
 
Burty's Avatar
 
Country: UK
Location: Weston Super Mare
Occupation: Electrical Engineer

Join Date: Mar 2004
Location: Weston Super Mare
Posts: 6,351
Send a message via AIM to Burty
couple of complete pictures so you can see how nice it is
Attached Thumbnails
Click image for larger version

Name:	IMG_2129.jpg
Views:	421
Size:	134.0 KB
ID:	33056   Click image for larger version

Name:	IMG_2134.jpg
Views:	368
Size:	95.7 KB
ID:	33057   Click image for larger version

Name:	IMG_2135.jpg
Views:	290
Size:	84.8 KB
ID:	33058   Click image for larger version

Name:	IMG_2136.jpg
Views:	300
Size:	135.3 KB
ID:	33059   Click image for larger version

Name:	IMG_2138.jpg
Views:	344
Size:	103.4 KB
ID:	33060  

Burty is offline   Reply With Quote
Old 03-01-2012, 03:25 PM   #13
Registered User
 
Burty's Avatar
 
Country: UK
Location: Weston Super Mare
Occupation: Electrical Engineer

Join Date: Mar 2004
Location: Weston Super Mare
Posts: 6,351
Send a message via AIM to Burty
Quote:
Originally Posted by Burty View Post
this is a serious advert so please refrain from asking questions other than about this boat and sale details.
Quote:
Originally Posted by OCRDA View Post
What are you going to replace it with ??
Thanks Bob!! But I've sent you a PM
Burty is offline   Reply With Quote
Old 12-01-2012, 06:13 PM   #14
Registered User
 
Burty's Avatar
 
Country: UK
Location: Weston Super Mare
Occupation: Electrical Engineer

Join Date: Mar 2004
Location: Weston Super Mare
Posts: 6,351
Send a message via AIM to Burty
Right, I really need this gone so how about

Hull including centre console
Custom 180ltr stainless steel fuel tank with sump to fit into floor.
polished stainless steel clamp for tank.
tie bar transom assembly for extra strength polished stainless
cyco custom aluminium billet battery tray powder coated blue
cyco custom billet aluminium trim tabs (powder coated blue)with custom rams ( powder coated white) and bennett pumps
cyco custom polished stainless steel bow tank pick up ( only type that will fit due to the step.
cyco custom polished stainless lifting eyes

All for £ 2500
Burty is offline   Reply With Quote
Old 21-01-2012, 12:34 PM   #15
Registered User
 
Burty's Avatar
 
Country: UK
Location: Weston Super Mare
Occupation: Electrical Engineer

Join Date: Mar 2004
Location: Weston Super Mare
Posts: 6,351
Send a message via AIM to Burty
Needs to go, got to be out of dry storage within 2 weeks, £1750 ono,
no battery tray though but all of the above still there
Burty is offline   Reply With Quote
Old 21-01-2012, 01:01 PM   #16
Registered User
 
Tony Davis's Avatar
 
Country: Job Centre
Location: In a box
Occupation: Chaos's gofer
Interests: Skiving
Boat make: Spectre 30
Engines: 2 x Promax 225
Cruising area: In the bath

Join Date: Mar 2004
Location: In a box
Posts: 5,201
That sounds a real bargain, can't believe no one has bought it. I'd be tempted myself, if I didn't have so many projects on the go!
__________________
Chaos for Moderator.
Tony Davis is offline   Reply With Quote
Old 21-01-2012, 10:29 PM   #17
Registered User
 
Ph@ntastic's Avatar
 
Country: Netherlands
Location: Harderwijk
Occupation: See my website ;)
Interests: duh ......
Boat make: Seaquel 600XS & Seaquel 700XS
Engines: Merc 300XS
Cruising area: Veluwemeer/Ijsselmeer

Join Date: Dec 2006
Location: Harderwijk
Posts: 421
Its a bargain thats for sure , would love it next to the 600XS but its a longe and expensive drive to pick it up and i don't have a spare trailer
Ph@ntastic is offline   Reply With Quote
Old 22-01-2012, 12:36 AM   #18
Registered User
 
Burty's Avatar
 
Country: UK
Location: Weston Super Mare
Occupation: Electrical Engineer

Join Date: Mar 2004
Location: Weston Super Mare
Posts: 6,351
Send a message via AIM to Burty
borrow one dude, come on you know you want to....
Burty is offline   Reply With Quote
Old 22-01-2012, 01:12 AM   #19
Registered User
 
Burty's Avatar
 
Country: UK
Location: Weston Super Mare
Occupation: Electrical Engineer

Join Date: Mar 2004
Location: Weston Super Mare
Posts: 6,351
Send a message via AIM to Burty
I can deliver if you like dude.
Burty is offline   Reply With Quote
Old 22-01-2012, 11:28 AM   #20
Registered User
 
Rebel Skier's Avatar
 
Country: GB
Location: Surrey
Occupation: Architectural Designer and Ski Racer
Boat name: True Colours
Boat make: Cyclone 21'
Engines: Mercury 300xs
Cruising area: Worldwide

Join Date: Oct 2005
Location: Surrey
Posts: 320
Quote:
Originally Posted by Ph@ntastic View Post
Its a bargain thats for sure , would love it next to the 600XS but its a longe and expensive drive to pick it up and i don't have a spare trailer
when you think of what the boat is actually worth, with the amount of kit burty's throwing in with it, the journey will cost nothing at all! its a ridiculously cheap boat for that money! ok so there's a tiny little repair to be done but as has already been said that's hardly a bank breaker either!

(doing my best to help sell it rob! haha)
__________________

Rebel Skier is offline   Reply With Quote
Reply

« Seats wanted | P16 »
Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT +1. The time now is 08:08 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.
×