Cougar Sportracer and/or Honda BF225

[brett duke]

I am considering selling my Sportracer.

Due mainly to work commitments, family and other circumstances I sadly do not have the time available to dedicate to this refit.

Cougar Sportracer 27

HSR001 manufactured in August 2002 and featured at the Earls Court Boat Show. She is the original as confirmed by Cougar.
The hull has been fully reconditioned with all Gel stress fractures ground out, chine rails and transom areas etc tidied. Spa-bond, epoxy primer and Crystal White top-coat materials were used to complete the hull. All work was professionally completed.
Cock pit area is original black gel coat and requires re-finishing (polishing).
All stainless pop-up cleats and deck hardware re-fitted.
Fender locker bucket and hatch with anodised black hinges.
Original race canopy (fits over rear bench).
Re-conditioned cockpit rain cover.

Honda BF225

Mechanically 100%.
All cowlings have been sourced to replace damaged lower trays etc.
IMCO S/S Dual Hydraulic Steering Rams with wing Plates.
Race nose-cone.

Trailer

Original Twin Axle galvanised RM Trailer with spare wheel and bunks

The bladder cell fuel tank needs to be cut up and disposed of. The easiest and lowest cost option is to fit an aluminium tank underneath the rear passenger bench seat. I had already provisioned for this and have a quote and also the original CAD drawing for a rear position fuel tank.

I have the full history available. Some documented. She has seen a colourful life!

I have a CE Plate.

I have a pair of Reverie Carbon Fibre wing back seats with red leather pad cushions to match the rear seat cushions which are trimmed in red and have never been used.

I have the original wing back seats (need re-covering).

2 x Grabner Life Jackets
2 x Race Helmets with Neptune Inter-Comms
2 x Powertech Race Props (1 reworked)
A couple of old steering wheels
Navman tracker & repeater which did work but will require attention

The engine and hull are currently split. Just require re-rigging and fuel tank etc. or happy to split.

Please no comments about the Honda engine!

I am aware of some views regarding the Cougar Honda setup/relationship and the suitability for close circuit racing.

However, I trialled this rig half a dozen times in rough Solent waters and she performs superbly and is perfectly setup for a solid 65 - 67mph.

Structurally phenomenal and built of Kevlar construction so lightweight.

Please PM me for any further information required. Regarding the price, this would need to be discussed. I am open to sensible offers but also mindful that there are not too many of these stunning boats remaining on UK waters.

Thanks all.

[Campion 165(seb)]

I Think some more pics would be apriciated?

[brett duke]

Some here in my profile album bud:

http://www.boatmad.com/forum/members/1136-albums40.html

I have lots of the extensive hull refurb, too many to post on here..

[Campion 165(seb)]

Yep, Seen it after i read your post, but just thougt you could show the cockpit area a bit more? ��

[brett duke]

The seats which I was planning on fitting. Fronts are Reverie carbon seats and rear cushions are the original and were never used. The original seat brackets are in the boat or I have a couple of other sets if they are not compatible with new seats.

Cockpit is stripped now and mostly the original black gel coat apart from dash area which was painted silver. The dials and controls are all there.

Some shots of the boat at Earls Court which Cougar sent me and as she is now.

CE Plates I have had made, mine is the one on the left.

[fils pajeros]

Do you have a price please,,phil

[brett duke]

PM sent

[Campion 165(seb)]

Price me to����

[brett duke]

Hi Campion.

Please PM me to discuss if you are seriously interested in purchasing. The engine is de-rigged from hull.

I am able to sell separately or altogether. Are you in Denmark or UK? Drop me a line and I can give you my contact details.

Many thanks.

[brett duke]

Some Images after hull refurb

[brett duke]

TTT

[brett duke]

I may be able to include a period of free storage if required.

Secure compound and space to work on the boat.

All subject to arrangement.

Any interest - PM me contact details to discuss further

[brett duke]

TTT

[brett duke]

TTT

[Figgy87]

Price please

[brett duke]

Originally Posted by Figgy87

Price please

PM sent

[leeornsby]

Price please.

[brett duke]

Originally Posted by leeornsby

Price please.

PM sent

[noodle123]

Thanks Brett for selling me your boat....
It is without doubt the nicest boat and can not wait
To get it rigged.
Cheers

[Childsy]

[QUOTE=noodle123;268842]Thanks Brett for selling me your boat....
It is without doubt the nicest boat and can not wait
To get it rigged.
Cheers[/
Well done
Race or pleasure..?
Mark