Double Ride Guide Complete System

[DoubleSix]

Taken from my Ring21C. Complete system including both rack and pinion assemblies, steering wheel and long bolt, second steering tube that mounts to the front of the motor, all fixings. one cable has a small split (about 12-15mm long) in it at the outboard end next to the grease nipple. This split has been there since i bought the boat and has had a Jubilee Clip since (which is a long time - 15 years) and has not split any further. It could do with new grease nipples, and a more permanent repair to the cable, The steering wheel has chromed spokes and is quite nice and chunky but it has lost its centre cover (not the boss).

It has everything needed to fit to a boat but if you use it as such it would be entirely at your own risk, equally suitable as spares. I've only taken it off to fit a hydraulic system.

Located Dorset /Devon border or Bath/Bristol and its yours for the first (sensible) offer I get.... or failing that, I might have to give it away.
ANYONE?

[Big Dutch]

I need the bracket that goes on the engine,the bolts and the stainless arm that the cables go in if you have them.

[DoubleSix]

If nobody else comes in for the whole kit I guess those bits are yours, the rest will probably go in the skip. Where abouts are you based?

[Big Dutch]

You have pm