looking for imco Wing plate for 250 HO GEN1

[Frenchbruno]

Hi all,
i'm looking after a SS wing plate for a evinrude HO GEN 1 year 2011.
reference of the plate is Hello,
I'm looking after this part number=
WP-25-LR WING PLATE KIT
here an idea of the system, not showing the plate very well but all IMCO stuff.
let me know what you have.

[Frenchbruno]

The picture of the model I'm looking for.

[Paul E]

I had a wingplate made for my 200HO with a single Mayfair ram, which looked almost identical to that Imco one. The company that made it for me is closed until the new year now, but I can see if they still have the cad drawing and cut you one on the waterjet if you're stuck

[Frenchbruno]

Thanks Paul for your help on this, in fact I'm waiting a quotation from IMCO because we need also the studs, spacers, nuts. Like the kit showed on picture above.
Do you know it your mayfair ram use the same bore and stroke than the Imco one?
Does your Mayfair wing plate is flat like the IMCO one or if the plate use an offset up or down?

[Paul E]

I'm not sure on the bore & stroke sorry. It was flat, no offset. I just used longer bolts for the 5 holes that mounted the wingplate, nothing special needed