I purchased this engine in good faith that it was fully working with no issues.
However it I have discovered it has low compression on the top left cylinder as you look at the rear of the engine. The PSI on this cylinder is 90PSI. The remaining 5 cylinders are approx. 110-115psi.
I have now decided to break the engine for parts.
It starts and runs fine
PTT works as it should
Look at the videos on YouTube.
The engine starts well as can be seen in you tube video
https://youtu.be/5Z76o3WoVmI
The PTT works well shown in you tube video
https://youtu.be/UEdvMcETK68
Condition.
The covers are scratched and probably require a re-spray, the front latch on the front cover requires attention.
The cover are all there and solid.
Under the covers the engine is very clean , the leg is very good and the gearbox is in very good condition.
The engine has a very good 23 Inch prop full stainless steel .
A set of mercury controls in very good condition.
Cables , harness , just about all you need.
The remote oil tank is missing.
If you require parts please email
peter@peterscott3.wanadoo.co.uk
Text 07749164333
Or PM me.
Thanks for looking
I have photos but can work out how to put them on here.
I can email or text photos.
Regards
Peter
Linear Mode
