Mercury Black Max 200 trim motor

[Potts2002]

Hi
Looking for a square 3 wire 2 bolt trim motor for a 1991 Black Max V6 200. It is the last piece of the jigsaw to resurrect a rather neglected engine which is being brought back to life.
Anyone have one kicking around unwanted or know of where to contact?
Thanks in advance.
Potts2002

[Frenchbruno]

Hi,
your engine is a 200HP 1991 7 petals reeds, so serial number is between
0C291520 THRU 0D081999
Be carefull this serial use 2 different powertrim design, called design 1 and design 2, you need to check wich one you use.
Power Trim Components(Design I)
Power Trim Components(Design II)
Power Trim Motor(Use With Design II Power Trim System)
Power Trim Pump(Use With Design I Power Trim Pump)

Confirm what you use, and then you can find aftermarket motor,or motor & pump.
99186T en vente | eBay

or sierra
Sierra Marine 18-6273-1 - Tilt Trim Motor

if you use motor ref 811628
ARCO is a good brand to go,
NIB Mercury 75 225HP Trim Motor 3 Wire AFT Fill Replaces Square 811628 Arco 6279 | eBay


or
Mercury Quicksilver 878265A 6 - Retrofit Kit - Trim
Or
Sierra Marine 18-6774 - Trim Motor - 811628
or
Arco Marine 6279 - Trim Motor, 811628

following the good reference you need , you can also find some other possibilities on the web, aboce there are a few exemple.

Be careful of the oil you've to use in the powertrim....
http://www.boatmad.com/forum/f5/hydr...tml#post261184

In UK you have a good dealer too for such parts, and good price too.
Engine Room Marine Parts

Or for the complete pump and motor in Uk too.
Engine Room Marine Parts


Good luck.

[Potts2002]

Hi FrenchBruno Thanks for such an informative post. One on order now so fingers crossed!!