Mercury Engine Flushing Kits

Burty · 05-08-2011, 10:05 AM

I've made myself a flushing kit for my 2.5's but theses will work on any merc gearbox with low water pick ups. As I had to buy 30Metres of pipe to make mine I thought I would offer to make some for other people to use up my remaining pipe.

I can do

2 hole CLE £ 25
Sportsmaster £ 30
4 Hole CLE £ 35 (as in the pictures)

Comes complete with hose attachment on one end so you are ready to insert and connect up.

all above prices include postage to anywhere in the UK

bigboy · 05-08-2011, 10:15 AM

My sportmaster has rectangular holes in the pickup so will that work too. I made one of these myself for my cle too and it works great. For my sporty I made a fibreglass cup which fits over the front of the gearcase like a glove. I didnt make one with the tubes because I was afraid too much pressure would be lost by the rectangular inlet holes.

Burty · 05-08-2011, 11:22 AM

I had a sportsmaster on my old boat and always used one of these with no problems, you push the pipes about 4" up the holes

Tony Davis · 05-08-2011, 12:03 PM

Bennett trim tab hose and a jubilee clip, works every time!

Burty · 05-08-2011, 12:54 PM

Quote:

Originally Posted by Tony Davis

Bennett trim tab hose and a jubilee clip, works every time!

Never thought of that dude but now you mention it the bennett hose is probably the same diameter, however you still need the 'Y' pieces or the water just pisses out of the other holes.

You are welcome to one FOC if your cat has low water pickups dude or even if you want one for home

Tony Davis · 05-08-2011, 01:21 PM

It's ok thanks, I bought a merc flusher with the boat.

You can get four pieces of bennett hose into a std 1/2" garden hose if you use a heat gun!

Buying a set of trim tabs is the expensive bit!

Burty · 30-08-2011, 08:36 PM

Anyone else want one dudes?

Burty · 11-09-2011, 12:14 PM

ttt

Burty · 21-09-2011, 05:47 PM

ttt

Burty · 18-12-2011, 12:20 PM

still got bits left to make some more

Burty · 26-01-2012, 05:06 PM

can still make them if required

Burty · 13-04-2016, 02:56 PM

Still got enough parts to make a couple of kits if anyone wants one

boatnut · 13-04-2016, 05:24 PM

pm sent

Jai · 03-07-2016, 01:25 PM

Any chance of still getting one of these?

Burty · 05-07-2016, 01:53 PM

yup, what gearcase? might be a bit more to post to gurnsey too.

Jai · 05-07-2016, 05:33 PM

Quote:

Originally Posted by Burty

yup, what gearcase? might be a bit more to post to gurnsey too.

2 Hole please buddy, No worries regarding postage...
Drop me a PM, Cheers

Getagrip28 · 03-06-2022, 08:28 PM

Hi , are you still making these flush kits. I’ve got a
Yamaha 90 with a bobs nose cone and can’t seem to get it to flush on a tap using a big bucket. Thanks

B321 · 15-08-2022, 02:29 PM

Quote:

Originally Posted by Burty

Still got enough parts to make a couple of kits if anyone wants one

Still making them mate?

Thanks