Raker 26 wanted

[Renegade]

as the heading says. Not a raker 2 thanks. px could be poss for other props. I am placing this ad on behalf of someone.
Many thanks
Paul

[odyssey aka Blue streak]

im running a raker 26 on my evinrude i think its 14 1/2" dia what hub is it your after and are you looking to try one or buy one. im not looking to sell mine YET not untill i find a better high speed replacement but your welcome to try it as i beleave you are local and have spent time on the water with driver 510 rich

[Renegade]

I already have one cheers mate but i need another one, yes i am down the eca a bit with the lads. i am looking to buy anyway... condition depends on price. Thanks anyway. and it is 14.5 dia.
Paul

[Renegade]

what prop are you looking for? i have access to a few tuned props that are for sale around £350 mark.

[odyssey aka Blue streak]

now worrys just thought i would offer it if it was of interest to you but never mind. As for props not to sure. All advice is welcome. Im running an Evinrude 235 on a sharp 19.6. Problems lie in the fact that currently on the 26 its slow on to the plan... Ie the prop is to big but when on the plan at WOT there is no boat in the water we reach 67 mph and then rev out. So i have to find a compramise some where. May be a worked prop would aid planning time and top end.... Not sure.. Currently running a 3 blade 26" raker revs at 6200 rpm at 67 mph.. slow and laboured to plain at 10secs. No cavitation evident at all Prop vented to 10mm at 3 positions

[Renegade]

Rakers are a pig to get on the plane, especiallybif they are un worked. with regards to the props i can get are you happy with bow lift? if i can get some to try what would you like to achieve?
Paul