Ski poles

Dan · 20-04-2005, 10:08 PM

If any of you are after a standard straight ski pole (around 1300mm but can go longer), I`m doing some at the mo. Finished in mirror polished stainless, with all the brackets etc etc £60 inc carriage. Drop me a PM if needed

darexms · 21-04-2005, 09:17 AM

What diameter are they and what type of fittings do they come with?

Any pics?

Dan · 21-04-2005, 10:10 AM

Finished in 40mm polished stainless, although can go to whatever di you need. Fits into a U secton that you fix to the floor, which has a pin going though both it and the pole. Laser cut plate to go on top of the fibre glass to take the strain. I`ll try and take a pic tonight of my one.
Cheers
Dan

darexms · 21-04-2005, 10:55 AM

Sounds good to me, look forward to seeing the pics!

Dan · 21-04-2005, 05:21 PM

This is my one which I`ve had for years (hence all the dirt!)

Dan · 21-04-2005, 05:23 PM

And the base. This U section was originally done from ali, but I`ve changed that to stainless. Simply remove the pin at the base and out comes the pole, so your all over cover will still fit.

darexms · 27-04-2005, 01:36 PM

I need to take some measurements when the first hull and deck is bonded together next week, is there a deal to be had for 3 poles and fitings?

Lars T · 27-04-2005, 01:52 PM

Include me into the deal

that's 4 poles in total then..

Dan · 27-04-2005, 03:06 PM

darexms,
I will be able to do something, just let me know the finished length that you require.
Lars,
I will post the pictures direct to your email.

Cheers

Jon · 27-04-2005, 04:53 PM

Dan,

Are they suitable for pole dancers?

darexms · 27-04-2005, 05:05 PM

Quote:

Originally posted by Dan
darexms,
I will be able to do something, just let me know the finished length that you require.
Lars,
I will post the pictures direct to your email.

Cheers

Cheers

I'll be in contact next week

Dan · 27-04-2005, 05:09 PM

Quote:

Originally posted by Jon
Dan,

Are they suitable for pole dancers?

I guess so, if your into midget dancers they should be fine!!!
(could be painful though with the T peice crossed top)

Lars T · 28-04-2005, 09:02 AM

Dan - how long should a ski-pole be?? or do i have to measure from the bottom of the boat to the top of the engine?

anyone with a Phantom 21 or 20 - how high/long is your ski-pole?

eyeye · 01-05-2005, 12:21 AM

I guess so, if your into midget dancers they should be fine!!!

Garfish.

Lars T · 05-05-2005, 03:23 PM

No probs dancing my pole...!!

anyway just measure the height needed to clear my enigne around 1250mm so i guess something around 1300mm will do..

Dan here's my PO:

1 pole please

Dan · 03-06-2005, 06:50 PM

Got 2 left of this batch if anyones interested.
£60inc carriage