Boatmad.com


Reply
 
Thread Tools Display Modes
 
Old 12-12-2011, 04:06 PM   #1
Registered User
 
Marinautic's Avatar
 
Country: UK
Location: Poole
Occupation: Mercury/Mercruiser Sales

Join Date: Sep 2007
Location: Poole
Posts: 501
V6 Mercury parts

A client of mine has a large quantity of Mercury V6 parts that will be advertised for sale in the very near future. Here is a list showing a selection of what's available if anyone is even interested. I know that he will not be interested in doing deals for singular small items but will obviously be open to offers for bulk quantities.

V6 Mercury Parts
A large selection of the following used parts, some new ,some very good condition

10 x Fly wheel covers
10 x Fly wheels 16amp
5 x Fly wheels 40 amp
5 x Fly wheels light weight hi-performance left & right handed
5 x Stators 16 & 40 amp
5 x Voltage regulators for the above
30 x Top and bottom crank case end caps
30 x 2-2.4-2.5 litre cylinder heads
10 x 2-2.4-2.5 litre exhaust divider plates
20 x Ignition coils & covers
8 x Starter motors left & right
Engine wiring looms
5 x Sets of carburetors
8 x Intake manifolds
20 x Reeds
10 x Reed chests
12 x Injector's
5 x 2.4-2.5 ecuís
10 x Switch boxes
Large box of assorted engine looms
Large box of assorted engine brackets
Large box of assorted engine electrics
2 litre blocks & crank cases
XR2 blocks & crank cases
2.4 litre blocks & crank cases
2.5 litre blocks & crank cases
2 litre 150 tuned power head
2.7 tuned block & new pistons
2 litre cranks for reconditioning
2.5 (260) litre cranks for reconditioning
2.5 race cranks
Large assortment of con-rods
200 + used pistons 2-2.4-2.5 litre
XR2 power head
Gears left & right
Propeller shafts left & right
Drive shafts (various)
Left hand cle gear box
Bearing carriers left & right (heavy duty)
Solid top mount plates
Two piece mount plates
Drive shaft housings (pleasure and race)
Mid sections (pleasure and race)
Various gaskets
Bearings
Seals
Large quantity of carb main jets (all normal race sizes)
Various props + hubs (race)
Plus many more items to list

I will get some pics up on FB/BM but firstly wanted to know if there was any interest.
__________________

Marinautic is offline   Reply With Quote
Old 12-12-2011, 05:22 PM   #2
Registered User
 
sean1982's Avatar
 
Country: Channel Islands
Location: Guernsey
Occupation: Plant Operator
Interests: Cars/Boats/Bikes/Women/Beer
Boat name: Paranoid
Boat make: Phantom 20
Engines: Merc 2.5
Cruising area: Herm/Sark

Join Date: Jul 2009
Location: Guernsey
Posts: 269
Quote:
Originally Posted by Marinautic View Post
A client of mine has a large quantity of Mercury V6 parts that will be advertised for sale in the very near future. Here is a list showing a selection of what's available if anyone is even interested. I know that he will not be interested in doing deals for singular small items but will obviously be open to offers for bulk quantities.

V6 Mercury Parts
A large selection of the following used parts, some new ,some very good condition

10 x Fly wheel covers
10 x Fly wheels 16amp
5 x Fly wheels 40 amp
5 x Fly wheels light weight hi-performance left & right handed
5 x Stators 16 & 40 amp
5 x Voltage regulators for the above
30 x Top and bottom crank case end caps
30 x 2-2.4-2.5 litre cylinder heads
10 x 2-2.4-2.5 litre exhaust divider plates
20 x Ignition coils & covers
8 x Starter motors left & right
Engine wiring looms
5 x Sets of carburetors
8 x Intake manifolds
20 x Reeds
10 x Reed chests
12 x Injector's
5 x 2.4-2.5 ecuís
10 x Switch boxes
Large box of assorted engine looms
Large box of assorted engine brackets
Large box of assorted engine electrics
2 litre blocks & crank cases
XR2 blocks & crank cases
2.4 litre blocks & crank cases
2.5 litre blocks & crank cases
2 litre 150 tuned power head
2.7 tuned block & new pistons
2 litre cranks for reconditioning
2.5 (260) litre cranks for reconditioning
2.5 race cranks
Large assortment of con-rods
200 + used pistons 2-2.4-2.5 litre
XR2 power head
Gears left & right
Propeller shafts left & right
Drive shafts (various)
Left hand cle gear box
Bearing carriers left & right (heavy duty)
Solid top mount plates
Two piece mount plates
Drive shaft housings (pleasure and race)
Mid sections (pleasure and race)
Various gaskets
Bearings
Seals
Large quantity of carb main jets (all normal race sizes)
Various props + hubs (race)
Plus many more items to list

I will get some pics up on FB/BM but firstly wanted to know if there was any interest.
interseted in an offshore mid if he has any?
__________________

sean1982 is offline   Reply With Quote
Old 12-12-2011, 05:44 PM   #3
Registered User
 
driver510's Avatar
 
Country: UK
Location: Portsmouth
Occupation: Marine Engineer
Interests: everything fast
Boat make: Phantom 28/Ring 16
Engines: 2x Mercury 3.0 250 EFI/Evinrude 70
Cruising area: Solent

Join Date: Nov 2005
Location: Portsmouth
Posts: 1,255
Parts

Pm sent
__________________
www.rsoutboards.co.uk
driver510 is offline   Reply With Quote
Old 12-12-2011, 05:55 PM   #4
Le Cat
 
FrenchPhil's Avatar
 
Country: France
Location: Paris
Occupation: Computer Sales
Boat name: Le Cat
Boat make: Argo Cat 18
Engines: Mercury 2.4EFI
Cruising area: Paris

Join Date: Mar 2004
Location: Paris
Posts: 753
Prop details would be nice.
FrenchPhil is offline   Reply With Quote
Old 12-12-2011, 11:06 PM   #5
Too many projects.....
 
pugracer285's Avatar
 
Country: UK
Location: Warsash
Occupation: Sunseeker Sales @ Swanwick
Interests: Making things go fast....
Boat name: Top Gun
Boat make: Sunseeker Hawk 27
Engines: 2x Volvo Penta 5.7 V8s
Cruising area: South Coast

Join Date: Sep 2007
Location: Warsash
Posts: 220
I need:

1 x 20" 3.0L Opti midsection
1 x 20" driveshaft for the above
1 x gear selector rod as above

(basically to convert a 25" engine to a 20" setup.

James
pugracer285 is offline   Reply With Quote
Old 18-12-2011, 11:43 PM   #6
Registered User
 
Brookp01's Avatar
 
Country: UK
Occupation: IT Consultant
Boat name: G4, Missconduct
Boat make: DAC, Phantom 18
Engines: Mercury 280 ROS, Mercury 280 + S3000 electrics
Cruising area: Windermere & Barrow

Join Date: Sep 2005
Posts: 67
280 Ros Ecu

Quote:
Originally Posted by Marinautic View Post
A client of mine has a large quantity of Mercury V6 parts that will be advertised for sale in the very near future. Here is a list showing a selection of what's available if anyone is even interested. I know that he will not be interested in doing deals for singular small items but will obviously be open to offers for bulk quantities.

V6 Mercury Parts
A large selection of the following used parts, some new ,some very good condition

10 x Fly wheel covers
10 x Fly wheels 16amp
5 x Fly wheels 40 amp
5 x Fly wheels light weight hi-performance left & right handed
5 x Stators 16 & 40 amp
5 x Voltage regulators for the above
30 x Top and bottom crank case end caps
30 x 2-2.4-2.5 litre cylinder heads
10 x 2-2.4-2.5 litre exhaust divider plates
20 x Ignition coils & covers
8 x Starter motors left & right
Engine wiring looms
5 x Sets of carburetors
8 x Intake manifolds
20 x Reeds
10 x Reed chests
12 x Injector's
5 x 2.4-2.5 ecuís
10 x Switch boxes
Large box of assorted engine looms
Large box of assorted engine brackets
Large box of assorted engine electrics
2 litre blocks & crank cases
XR2 blocks & crank cases
2.4 litre blocks & crank cases
2.5 litre blocks & crank cases
2 litre 150 tuned power head
2.7 tuned block & new pistons
2 litre cranks for reconditioning
2.5 (260) litre cranks for reconditioning
2.5 race cranks
Large assortment of con-rods
200 + used pistons 2-2.4-2.5 litre
XR2 power head
Gears left & right
Propeller shafts left & right
Drive shafts (various)
Left hand cle gear box
Bearing carriers left & right (heavy duty)
Solid top mount plates
Two piece mount plates
Drive shaft housings (pleasure and race)
Mid sections (pleasure and race)
Various gaskets
Bearings
Seals
Large quantity of carb main jets (all normal race sizes)
Various props + hubs (race)
Plus many more items to list

I will get some pics up on FB/BM but firstly wanted to know if there was any interest.
Is there a 280 ROS ECU available?
Brookp01 is offline   Reply With Quote
Old 19-12-2011, 12:41 AM   #7
Registered User
 
Hydrostream's Avatar
 
Country: Ireland
Location: Dublin
Occupation: Boatbuilder
Boat make: Hydrostream V-king, 650SS OCR ,Ring 21, Ring 18, Phantom 18.
Engines: 300Hp Mercury 2.4, 130 Yamaha, Bridgeport EFI, XR6, Merc 200.
Cruising area: Malahide, Dublin

Join Date: May 2004
Location: Dublin
Posts: 1,803
List and prices on the 2.0, 2.4 & 2.5 blocks?
Any bridgeport blocks there?

Interested in some other parts too.
__________________
www.powermarine.ie

[SIGPIC][/SIGPIC]
Hydrostream is offline   Reply With Quote
Old 19-12-2011, 01:49 PM   #8
Registered User
 
Country: Holland
Location: Friesland/Netherlands
Occupation: own company
Interests: fast Boats and MX Bikes
Boat make: Fountain Fever
Engines: 600SCI
Cruising area: Lemmer/ Ijselmeer

Join Date: Dec 2005
Location: Friesland/Netherlands
Posts: 137
i have a compleet engine 20 inch opti 225 with blown motor wil sel the compleet motor for 3500 pounds powerhead is realy broken but the krankschaft is perfeckt!!









Quote:
Originally Posted by pugracer285 View Post
I need:

1 x 20" 3.0L Opti midsection
1 x 20" driveshaft for the above
1 x gear selector rod as above

(basically to convert a 25" engine to a 20" setup.

James
__________________
Regards Sake
Sake is offline   Reply With Quote
Old 19-12-2011, 04:02 PM   #9
Registered User
 
Marinautic's Avatar
 
Country: UK
Location: Poole
Occupation: Mercury/Mercruiser Sales

Join Date: Sep 2007
Location: Poole
Posts: 501
Quote:
Originally Posted by Marinautic View Post
A client of mine has a large quantity of Mercury V6 parts that will be advertised for sale in the very near future. Here is a list showing a selection of what's available if anyone is even interested. I know that he will not be interested in doing deals for singular small items but will obviously be open to offers for bulk quantities.

V6 Mercury Parts
A large selection of the following used parts, some new ,some very good condition

10 x Fly wheel covers
10 x Fly wheels 16amp
5 x Fly wheels 40 amp
5 x Fly wheels light weight hi-performance left & right handed
5 x Stators 16 & 40 amp
5 x Voltage regulators for the above
30 x Top and bottom crank case end caps
30 x 2-2.4-2.5 litre cylinder heads
10 x 2-2.4-2.5 litre exhaust divider plates
20 x Ignition coils & covers
8 x Starter motors left & right
Engine wiring looms
5 x Sets of carburetors
8 x Intake manifolds
20 x Reeds
10 x Reed chests
12 x Injector's
5 x 2.4-2.5 ecuís
10 x Switch boxes
Large box of assorted engine looms
Large box of assorted engine brackets
Large box of assorted engine electrics
2 litre blocks & crank cases
XR2 blocks & crank cases
2.4 litre blocks & crank cases
2.5 litre blocks & crank cases
2 litre 150 tuned power head
2.7 tuned block & new pistons
2 litre cranks for reconditioning
2.5 (260) litre cranks for reconditioning
2.5 race cranks
Large assortment of con-rods
200 + used pistons 2-2.4-2.5 litre
XR2 power head
Gears left & right
Propeller shafts left & right
Drive shafts (various)
Left hand cle gear box
Bearing carriers left & right (heavy duty)
Solid top mount plates
Two piece mount plates
Drive shaft housings (pleasure and race)
Mid sections (pleasure and race)
Various gaskets
Bearings
Seals
Large quantity of carb main jets (all normal race sizes)
Various props + hubs (race)
Plus many more items to list

I will get some pics up on FB/BM but firstly wanted to know if there was any interest.
I now own all of these parts so can begin to get pricing/pics sorted. Anyone who pm'd will obviously get first shout if still interested. There is a lot more than shown on the list and it will take some going through.
Marinautic is offline   Reply With Quote
Old 19-12-2011, 04:09 PM   #10
Le Cat
 
FrenchPhil's Avatar
 
Country: France
Location: Paris
Occupation: Computer Sales
Boat name: Le Cat
Boat make: Argo Cat 18
Engines: Mercury 2.4EFI
Cruising area: Paris

Join Date: Mar 2004
Location: Paris
Posts: 753
Still interested in Props...
FrenchPhil is offline   Reply With Quote
Old 19-12-2011, 04:09 PM   #11
Registered User
 
Marinautic's Avatar
 
Country: UK
Location: Poole
Occupation: Mercury/Mercruiser Sales

Join Date: Sep 2007
Location: Poole
Posts: 501
Quote:
Originally Posted by Brookp01 View Post
Is there a 280 ROS ECU available?
No, unfortunately not but I do have 2 x 280 CON ECU's which from memory only have factory run-up hrs clocked (off new engines). Can be confirmed if needed.
Marinautic is offline   Reply With Quote
Old 20-12-2011, 12:27 PM   #12
Registered User
 
Techteam's Avatar
 
Country: UK
Location: Windermere

Join Date: Oct 2005
Location: Windermere
Posts: 555
Paul

If the consumers are the right price I can flash it for you.
Techteam is offline   Reply With Quote
Old 23-04-2012, 06:51 PM   #13
Registered User
 

Join Date: Apr 2012
Posts: 53
Looking for 3 x port pistons 1999 200 mercury mariner carb motor std bore
Please advise if you can assist
I will be using new rings obviously
nugent is offline   Reply With Quote
Old 24-04-2012, 11:29 AM   #14
Registered User
 
phantom151's Avatar
 

Join Date: Feb 2012
Posts: 50
v6 parts

can i have a phone number to call you please
malcolm m mob 07831 123656
phantom151 is offline   Reply With Quote
Old 14-05-2012, 04:28 PM   #15
Registered User
 

Join Date: Dec 2011
Posts: 5
hi iam looking for a nice top cover or the seal if you have thank you
superman is offline   Reply With Quote
Old 15-02-2013, 06:21 PM   #16
Registered User
 

Join Date: Feb 2013
Posts: 8
Fly wheels light weight hi-performance

Quote:
Originally Posted by Marinautic View Post
A client of mine has a large quantity of Mercury V6 parts that will be advertised for sale in the very near future. Here is a list showing a selection of what's available if anyone is even interested. I know that he will not be interested in doing deals for singular small items but will obviously be open to offers for bulk quantities.

V6 Mercury Parts
A large selection of the following used parts, some new ,some very good condition

10 x Fly wheel covers
10 x Fly wheels 16amp
5 x Fly wheels 40 amp
5 x Fly wheels light weight hi-performance left & right handed
5 x Stators 16 & 40 amp
5 x Voltage regulators for the above
30 x Top and bottom crank case end caps
30 x 2-2.4-2.5 litre cylinder heads
10 x 2-2.4-2.5 litre exhaust divider plates
20 x Ignition coils & covers
8 x Starter motors left & right
Engine wiring looms
5 x Sets of carburetors
8 x Intake manifolds
20 x Reeds
10 x Reed chests
12 x Injector's
5 x 2.4-2.5 ecuís
10 x Switch boxes
Large box of assorted engine looms
Large box of assorted engine brackets
Large box of assorted engine electrics
2 litre blocks & crank cases
XR2 blocks & crank cases
2.4 litre blocks & crank cases
2.5 litre blocks & crank cases
2 litre 150 tuned power head
2.7 tuned block & new pistons
2 litre cranks for reconditioning
2.5 (260) litre cranks for reconditioning
2.5 race cranks
Large assortment of con-rods
200 + used pistons 2-2.4-2.5 litre
XR2 power head
Gears left & right
Propeller shafts left & right
Drive shafts (various)
Left hand cle gear box
Bearing carriers left & right (heavy duty)
Solid top mount plates
Two piece mount plates
Drive shaft housings (pleasure and race)
Mid sections (pleasure and race)
Various gaskets
Bearings
Seals
Large quantity of carb main jets (all normal race sizes)
Various props + hubs (race)
Plus many more items to list

I will get some pics up on FB/BM but firstly wanted to know if there was any interest.
hello
I am interested in your flywheel lightweight hi-performance normal rotation for 2.5 efi offshore, thank you for telling me the price with shipping costs for France and the proceedings of payment.
cordially
climatelect is offline   Reply With Quote
Old 10-05-2013, 08:57 PM   #17
Registered User
 
Country: sweden
Boat make: Argo-catt-21
Engines: merc 2,5 efi 280 15"
Cruising area: torne river

Join Date: Oct 2012
Posts: 12
Hello!
Do you have any mercury 2,5 efi 260 hi-po block in good shape,or one with just one or two bad bores ?
If you have how mutch for it?
Do you have any nicasil sleeves for these engines?
How mutch?
argo-catt is offline   Reply With Quote
Old 10-05-2013, 09:27 PM   #18
Registered User
 
Country: sweden
Boat make: Argo-catt-21
Engines: merc 2,5 efi 280 15"
Cruising area: torne river

Join Date: Oct 2012
Posts: 12
Quote:
Originally Posted by Marinautic View Post
A client of mine has a large quantity of Mercury V6 parts that will be advertised for sale in the very near future. Here is a list showing a selection of what's available if anyone is even interested. I know that he will not be interested in doing deals for singular small items but will obviously be open to offers for bulk quantities.

V6 Mercury Parts
A large selection of the following used parts, some new ,some very good condition

10 x Fly wheel covers
10 x Fly wheels 16amp
5 x Fly wheels 40 amp
5 x Fly wheels light weight hi-performance left & right handed
5 x Stators 16 & 40 amp
5 x Voltage regulators for the above
30 x Top and bottom crank case end caps
30 x 2-2.4-2.5 litre cylinder heads
10 x 2-2.4-2.5 litre exhaust divider plates
20 x Ignition coils & covers
8 x Starter motors left & right
Engine wiring looms
5 x Sets of carburetors
8 x Intake manifolds
20 x Reeds
10 x Reed chests
12 x Injector's
5 x 2.4-2.5 ecuís
10 x Switch boxes
Large box of assorted engine looms
Large box of assorted engine brackets
Large box of assorted engine electrics
2 litre blocks & crank cases
XR2 blocks & crank cases
2.4 litre blocks & crank cases
2.5 litre blocks & crank cases
2 litre 150 tuned power head
2.7 tuned block & new pistons
2 litre cranks for reconditioning
2.5 (260) litre cranks for reconditioning
2.5 race cranks
Large assortment of con-rods
200 + used pistons 2-2.4-2.5 litre
XR2 power head
Gears left & right
Propeller shafts left & right
Drive shafts (various)
Left hand cle gear box
Bearing carriers left & right (heavy duty)
Solid top mount plates
Two piece mount plates
Drive shaft housings (pleasure and race)
Mid sections (pleasure and race)
Various gaskets
Bearings
Seals
Large quantity of carb main jets (all normal race sizes)
Various props + hubs (race)
Plus many more items to list

I will get some pics up on FB/BM but firstly wanted to know if there was any interest.

Join Date: Oct 2012
Posts: 1
sleeves
Hello!
Do you have any orginal nic sleeves with aluminium base for an 2,5 efi 260/280 or the f1 sleeves?
Or a complete block whith one or two bad holes in?
Regards argo-catt
argo-catt is offline   Reply With Quote
Old 11-05-2013, 11:50 PM   #19
Registered User
 
Country: Denmark
Location: Funen
Boat make: Askeladden 565 Wasper
Engines: Mercury Optimax 225

Join Date: Oct 2011
Location: Funen
Posts: 95
Could you pm me info on the injectors? also pics if you have any. Thanks
__________________

MartinN is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT +1. The time now is 03:42 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2019, vBulletin Solutions, Inc.