|
12-12-2011, 04:06 PM
|
#1
|
Registered User
Join Date: Sep 2007
Posts: 513
|
V6 Mercury parts
A client of mine has a large quantity of Mercury V6 parts that will be advertised for sale in the very near future. Here is a list showing a selection of what's available if anyone is even interested. I know that he will not be interested in doing deals for singular small items but will obviously be open to offers for bulk quantities.
V6 Mercury Parts
A large selection of the following used parts, some new ,some very good condition
10 x Fly wheel covers
10 x Fly wheels 16amp
5 x Fly wheels 40 amp
5 x Fly wheels light weight hi-performance left & right handed
5 x Stators 16 & 40 amp
5 x Voltage regulators for the above
30 x Top and bottom crank case end caps
30 x 2-2.4-2.5 litre cylinder heads
10 x 2-2.4-2.5 litre exhaust divider plates
20 x Ignition coils & covers
8 x Starter motors left & right
Engine wiring looms
5 x Sets of carburetors
8 x Intake manifolds
20 x Reeds
10 x Reed chests
12 x Injector's
5 x 2.4-2.5 ecu’s
10 x Switch boxes
Large box of assorted engine looms
Large box of assorted engine brackets
Large box of assorted engine electrics
2 litre blocks & crank cases
XR2 blocks & crank cases
2.4 litre blocks & crank cases
2.5 litre blocks & crank cases
2 litre 150 tuned power head
2.7 tuned block & new pistons
2 litre cranks for reconditioning
2.5 (260) litre cranks for reconditioning
2.5 race cranks
Large assortment of con-rods
200 + used pistons 2-2.4-2.5 litre
XR2 power head
Gears left & right
Propeller shafts left & right
Drive shafts (various)
Left hand cle gear box
Bearing carriers left & right (heavy duty)
Solid top mount plates
Two piece mount plates
Drive shaft housings (pleasure and race)
Mid sections (pleasure and race)
Various gaskets
Bearings
Seals
Large quantity of carb main jets (all normal race sizes)
Various props + hubs (race)
Plus many more items to list
I will get some pics up on FB/BM but firstly wanted to know if there was any interest.
__________________
|
|
|
12-12-2011, 05:22 PM
|
#2
|
Registered User
Country: Channel Islands
Location: Guernsey
Occupation: Plant Operator
Interests: Cars/Boats/Bikes/Women/Beer
Boat name: Paranoid
Boat make: Phantom 20
Engines: Merc 2.5
Cruising area: Herm/Sark
Join Date: Jul 2009
Location: Guernsey
Posts: 269
|
Quote:
Originally Posted by Marinautic
A client of mine has a large quantity of Mercury V6 parts that will be advertised for sale in the very near future. Here is a list showing a selection of what's available if anyone is even interested. I know that he will not be interested in doing deals for singular small items but will obviously be open to offers for bulk quantities.
V6 Mercury Parts
A large selection of the following used parts, some new ,some very good condition
10 x Fly wheel covers
10 x Fly wheels 16amp
5 x Fly wheels 40 amp
5 x Fly wheels light weight hi-performance left & right handed
5 x Stators 16 & 40 amp
5 x Voltage regulators for the above
30 x Top and bottom crank case end caps
30 x 2-2.4-2.5 litre cylinder heads
10 x 2-2.4-2.5 litre exhaust divider plates
20 x Ignition coils & covers
8 x Starter motors left & right
Engine wiring looms
5 x Sets of carburetors
8 x Intake manifolds
20 x Reeds
10 x Reed chests
12 x Injector's
5 x 2.4-2.5 ecu’s
10 x Switch boxes
Large box of assorted engine looms
Large box of assorted engine brackets
Large box of assorted engine electrics
2 litre blocks & crank cases
XR2 blocks & crank cases
2.4 litre blocks & crank cases
2.5 litre blocks & crank cases
2 litre 150 tuned power head
2.7 tuned block & new pistons
2 litre cranks for reconditioning
2.5 (260) litre cranks for reconditioning
2.5 race cranks
Large assortment of con-rods
200 + used pistons 2-2.4-2.5 litre
XR2 power head
Gears left & right
Propeller shafts left & right
Drive shafts (various)
Left hand cle gear box
Bearing carriers left & right (heavy duty)
Solid top mount plates
Two piece mount plates
Drive shaft housings (pleasure and race)
Mid sections (pleasure and race)
Various gaskets
Bearings
Seals
Large quantity of carb main jets (all normal race sizes)
Various props + hubs (race)
Plus many more items to list
I will get some pics up on FB/BM but firstly wanted to know if there was any interest.
|
interseted in an offshore mid if he has any?
__________________
|
|
|
12-12-2011, 05:44 PM
|
#3
|
Registered User
Country: UK
Location: Portsmouth
Occupation: Marine Engineer
Interests: everything fast
Boat make: Phantom 28/phantom 18
Engines: 2x Mercury 3.0 225 optimax/yamaha 85
Cruising area: Solent
Join Date: Nov 2005
Location: Portsmouth
Posts: 1,356
|
Parts
Pm sent
|
|
|
12-12-2011, 05:55 PM
|
#4
|
Le Cat
Country: France
Location: Paris
Occupation: Computer Sales
Boat name: Le Cat
Boat make: Argo Cat 18
Engines: Mercury 2.4EFI
Cruising area: Paris
Join Date: Mar 2004
Location: Paris
Posts: 753
|
Prop details would be nice.
|
|
|
12-12-2011, 11:06 PM
|
#5
|
Too many projects.....
Country: UK
Location: Warsash
Occupation: Sunseeker Sales @ Swanwick
Interests: Making things go fast....
Boat name: Top Gun
Boat make: Sunseeker Hawk 27
Engines: 2x Volvo Penta 5.7 V8s
Cruising area: South Coast
Join Date: Sep 2007
Location: Warsash
Posts: 221
|
I need:
1 x 20" 3.0L Opti midsection
1 x 20" driveshaft for the above
1 x gear selector rod as above
(basically to convert a 25" engine to a 20" setup.
James
|
|
|
18-12-2011, 11:43 PM
|
#6
|
Registered User
Country: UK
Occupation: IT Consultant
Boat name: G4, Missconduct
Boat make: DAC, Phantom 18
Engines: Mercury 280 ROS, Mercury 280 + S3000 electrics
Cruising area: Windermere & Barrow
Join Date: Sep 2005
Posts: 67
|
280 Ros Ecu
Quote:
Originally Posted by Marinautic
A client of mine has a large quantity of Mercury V6 parts that will be advertised for sale in the very near future. Here is a list showing a selection of what's available if anyone is even interested. I know that he will not be interested in doing deals for singular small items but will obviously be open to offers for bulk quantities.
V6 Mercury Parts
A large selection of the following used parts, some new ,some very good condition
10 x Fly wheel covers
10 x Fly wheels 16amp
5 x Fly wheels 40 amp
5 x Fly wheels light weight hi-performance left & right handed
5 x Stators 16 & 40 amp
5 x Voltage regulators for the above
30 x Top and bottom crank case end caps
30 x 2-2.4-2.5 litre cylinder heads
10 x 2-2.4-2.5 litre exhaust divider plates
20 x Ignition coils & covers
8 x Starter motors left & right
Engine wiring looms
5 x Sets of carburetors
8 x Intake manifolds
20 x Reeds
10 x Reed chests
12 x Injector's
5 x 2.4-2.5 ecu’s
10 x Switch boxes
Large box of assorted engine looms
Large box of assorted engine brackets
Large box of assorted engine electrics
2 litre blocks & crank cases
XR2 blocks & crank cases
2.4 litre blocks & crank cases
2.5 litre blocks & crank cases
2 litre 150 tuned power head
2.7 tuned block & new pistons
2 litre cranks for reconditioning
2.5 (260) litre cranks for reconditioning
2.5 race cranks
Large assortment of con-rods
200 + used pistons 2-2.4-2.5 litre
XR2 power head
Gears left & right
Propeller shafts left & right
Drive shafts (various)
Left hand cle gear box
Bearing carriers left & right (heavy duty)
Solid top mount plates
Two piece mount plates
Drive shaft housings (pleasure and race)
Mid sections (pleasure and race)
Various gaskets
Bearings
Seals
Large quantity of carb main jets (all normal race sizes)
Various props + hubs (race)
Plus many more items to list
I will get some pics up on FB/BM but firstly wanted to know if there was any interest.
|
Is there a 280 ROS ECU available?
|
|
|
19-12-2011, 12:41 AM
|
#7
|
Registered User
Country: Ireland
Location: Dublin
Occupation: Boatbuilder
Boat make: Hydrostream V-king, 650SS OCR ,Ring 21, Ring 18, Phantom 18.
Engines: 300Hp Mercury 2.4, 130 Yamaha, Bridgeport EFI, XR6, Merc 200.
Cruising area: Malahide, Dublin
Join Date: May 2004
Location: Dublin
Posts: 1,803
|
List and prices on the 2.0, 2.4 & 2.5 blocks?
Any bridgeport blocks there?
Interested in some other parts too.
|
|
|
19-12-2011, 01:49 PM
|
#8
|
Registered User
Country: Holland
Location: Friesland/Netherlands
Occupation: own company
Interests: fast Boats and MX Bikes
Boat make: Fountain Fever
Engines: 600SCI
Cruising area: Lemmer/ Ijselmeer
Join Date: Dec 2005
Location: Friesland/Netherlands
Posts: 137
|
i have a compleet engine 20 inch opti 225 with blown motor wil sel the compleet motor for 3500 pounds powerhead is realy broken but the krankschaft is perfeckt!!
Quote:
Originally Posted by pugracer285
I need:
1 x 20" 3.0L Opti midsection
1 x 20" driveshaft for the above
1 x gear selector rod as above
(basically to convert a 25" engine to a 20" setup.
James
|
__________________
Regards Sake
|
|
|
19-12-2011, 04:02 PM
|
#9
|
Registered User
Join Date: Sep 2007
Posts: 513
|
Quote:
Originally Posted by Marinautic
A client of mine has a large quantity of Mercury V6 parts that will be advertised for sale in the very near future. Here is a list showing a selection of what's available if anyone is even interested. I know that he will not be interested in doing deals for singular small items but will obviously be open to offers for bulk quantities.
V6 Mercury Parts
A large selection of the following used parts, some new ,some very good condition
10 x Fly wheel covers
10 x Fly wheels 16amp
5 x Fly wheels 40 amp
5 x Fly wheels light weight hi-performance left & right handed
5 x Stators 16 & 40 amp
5 x Voltage regulators for the above
30 x Top and bottom crank case end caps
30 x 2-2.4-2.5 litre cylinder heads
10 x 2-2.4-2.5 litre exhaust divider plates
20 x Ignition coils & covers
8 x Starter motors left & right
Engine wiring looms
5 x Sets of carburetors
8 x Intake manifolds
20 x Reeds
10 x Reed chests
12 x Injector's
5 x 2.4-2.5 ecu’s
10 x Switch boxes
Large box of assorted engine looms
Large box of assorted engine brackets
Large box of assorted engine electrics
2 litre blocks & crank cases
XR2 blocks & crank cases
2.4 litre blocks & crank cases
2.5 litre blocks & crank cases
2 litre 150 tuned power head
2.7 tuned block & new pistons
2 litre cranks for reconditioning
2.5 (260) litre cranks for reconditioning
2.5 race cranks
Large assortment of con-rods
200 + used pistons 2-2.4-2.5 litre
XR2 power head
Gears left & right
Propeller shafts left & right
Drive shafts (various)
Left hand cle gear box
Bearing carriers left & right (heavy duty)
Solid top mount plates
Two piece mount plates
Drive shaft housings (pleasure and race)
Mid sections (pleasure and race)
Various gaskets
Bearings
Seals
Large quantity of carb main jets (all normal race sizes)
Various props + hubs (race)
Plus many more items to list
I will get some pics up on FB/BM but firstly wanted to know if there was any interest.
|
I now own all of these parts so can begin to get pricing/pics sorted. Anyone who pm'd will obviously get first shout if still interested. There is a lot more than shown on the list and it will take some going through.
|
|
|
19-12-2011, 04:09 PM
|
#10
|
Le Cat
Country: France
Location: Paris
Occupation: Computer Sales
Boat name: Le Cat
Boat make: Argo Cat 18
Engines: Mercury 2.4EFI
Cruising area: Paris
Join Date: Mar 2004
Location: Paris
Posts: 753
|
Still interested in Props...
|
|
|
19-12-2011, 04:09 PM
|
#11
|
Registered User
Join Date: Sep 2007
Posts: 513
|
Quote:
Originally Posted by Brookp01
Is there a 280 ROS ECU available?
|
No, unfortunately not but I do have 2 x 280 CON ECU's which from memory only have factory run-up hrs clocked (off new engines). Can be confirmed if needed.
|
|
|
20-12-2011, 12:27 PM
|
#12
|
Registered User
Country: UK
Location: Windermere
Join Date: Oct 2005
Location: Windermere
Posts: 559
|
Paul
If the consumers are the right price I can flash it for you.
|
|
|
23-04-2012, 06:51 PM
|
#13
|
Registered User
Join Date: Apr 2012
Posts: 53
|
Looking for 3 x port pistons 1999 200 mercury mariner carb motor std bore
Please advise if you can assist
I will be using new rings obviously
|
|
|
24-04-2012, 11:29 AM
|
#14
|
Registered User
Join Date: Feb 2012
Posts: 51
|
v6 parts
can i have a phone number to call you please
malcolm m mob 07831 123656
|
|
|
14-05-2012, 04:28 PM
|
#15
|
Registered User
Join Date: Dec 2011
Posts: 5
|
hi iam looking for a nice top cover or the seal if you have thank you
|
|
|
15-02-2013, 06:21 PM
|
#16
|
Registered User
Join Date: Feb 2013
Posts: 13
|
Fly wheels light weight hi-performance
Quote:
Originally Posted by Marinautic
A client of mine has a large quantity of Mercury V6 parts that will be advertised for sale in the very near future. Here is a list showing a selection of what's available if anyone is even interested. I know that he will not be interested in doing deals for singular small items but will obviously be open to offers for bulk quantities.
V6 Mercury Parts
A large selection of the following used parts, some new ,some very good condition
10 x Fly wheel covers
10 x Fly wheels 16amp
5 x Fly wheels 40 amp
5 x Fly wheels light weight hi-performance left & right handed
5 x Stators 16 & 40 amp
5 x Voltage regulators for the above
30 x Top and bottom crank case end caps
30 x 2-2.4-2.5 litre cylinder heads
10 x 2-2.4-2.5 litre exhaust divider plates
20 x Ignition coils & covers
8 x Starter motors left & right
Engine wiring looms
5 x Sets of carburetors
8 x Intake manifolds
20 x Reeds
10 x Reed chests
12 x Injector's
5 x 2.4-2.5 ecu’s
10 x Switch boxes
Large box of assorted engine looms
Large box of assorted engine brackets
Large box of assorted engine electrics
2 litre blocks & crank cases
XR2 blocks & crank cases
2.4 litre blocks & crank cases
2.5 litre blocks & crank cases
2 litre 150 tuned power head
2.7 tuned block & new pistons
2 litre cranks for reconditioning
2.5 (260) litre cranks for reconditioning
2.5 race cranks
Large assortment of con-rods
200 + used pistons 2-2.4-2.5 litre
XR2 power head
Gears left & right
Propeller shafts left & right
Drive shafts (various)
Left hand cle gear box
Bearing carriers left & right (heavy duty)
Solid top mount plates
Two piece mount plates
Drive shaft housings (pleasure and race)
Mid sections (pleasure and race)
Various gaskets
Bearings
Seals
Large quantity of carb main jets (all normal race sizes)
Various props + hubs (race)
Plus many more items to list
I will get some pics up on FB/BM but firstly wanted to know if there was any interest.
|
hello
I am interested in your flywheel lightweight hi-performance normal rotation for 2.5 efi offshore, thank you for telling me the price with shipping costs for France and the proceedings of payment.
cordially
|
|
|
10-05-2013, 08:57 PM
|
#17
|
Registered User
Country: sweden
Boat make: Argo-catt-21
Engines: merc 2,5 efi 280 15"
Cruising area: torne river
Join Date: Oct 2012
Posts: 15
|
Hello!
Do you have any mercury 2,5 efi 260 hi-po block in good shape,or one with just one or two bad bores ?
If you have how mutch for it?
Do you have any nicasil sleeves for these engines?
How mutch?
|
|
|
10-05-2013, 09:27 PM
|
#18
|
Registered User
Country: sweden
Boat make: Argo-catt-21
Engines: merc 2,5 efi 280 15"
Cruising area: torne river
Join Date: Oct 2012
Posts: 15
|
Quote:
Originally Posted by Marinautic
A client of mine has a large quantity of Mercury V6 parts that will be advertised for sale in the very near future. Here is a list showing a selection of what's available if anyone is even interested. I know that he will not be interested in doing deals for singular small items but will obviously be open to offers for bulk quantities.
V6 Mercury Parts
A large selection of the following used parts, some new ,some very good condition
10 x Fly wheel covers
10 x Fly wheels 16amp
5 x Fly wheels 40 amp
5 x Fly wheels light weight hi-performance left & right handed
5 x Stators 16 & 40 amp
5 x Voltage regulators for the above
30 x Top and bottom crank case end caps
30 x 2-2.4-2.5 litre cylinder heads
10 x 2-2.4-2.5 litre exhaust divider plates
20 x Ignition coils & covers
8 x Starter motors left & right
Engine wiring looms
5 x Sets of carburetors
8 x Intake manifolds
20 x Reeds
10 x Reed chests
12 x Injector's
5 x 2.4-2.5 ecu’s
10 x Switch boxes
Large box of assorted engine looms
Large box of assorted engine brackets
Large box of assorted engine electrics
2 litre blocks & crank cases
XR2 blocks & crank cases
2.4 litre blocks & crank cases
2.5 litre blocks & crank cases
2 litre 150 tuned power head
2.7 tuned block & new pistons
2 litre cranks for reconditioning
2.5 (260) litre cranks for reconditioning
2.5 race cranks
Large assortment of con-rods
200 + used pistons 2-2.4-2.5 litre
XR2 power head
Gears left & right
Propeller shafts left & right
Drive shafts (various)
Left hand cle gear box
Bearing carriers left & right (heavy duty)
Solid top mount plates
Two piece mount plates
Drive shaft housings (pleasure and race)
Mid sections (pleasure and race)
Various gaskets
Bearings
Seals
Large quantity of carb main jets (all normal race sizes)
Various props + hubs (race)
Plus many more items to list
I will get some pics up on FB/BM but firstly wanted to know if there was any interest.
|
Join Date: Oct 2012
Posts: 1
sleeves
Hello!
Do you have any orginal nic sleeves with aluminium base for an 2,5 efi 260/280 or the f1 sleeves?
Or a complete block whith one or two bad holes in?
Regards argo-catt
|
|
|
11-05-2013, 11:50 PM
|
#19
|
Registered User
Country: Denmark
Location: Funen
Boat make: Askeladden 635 Freestyle
Engines: Mercury Verado 300
Join Date: Oct 2011
Location: Funen
Posts: 109
|
Could you pm me info on the injectors? also pics if you have any. Thanks
__________________
|
|
|
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|