Alexander

I´ve measured mine a few minutes ago and its 15 degrees. Another issue I saw was the thickness of your transom. They have told me that the thicknes should be max 52mm because otherwise there is a chance that if you trim the drive to the max with the cuurently thickness, the ax can flip out of the coupler.


You can find this kind of dimensions on the Mercruiser site.


If you want some pictures how I build in my engine, send me your email adress. Some short clips you can find on youtube by entering Ring 21C or search for the channel from multilex

Best regards

Alex

Hi thanks for looking , with your boat do you now angle of your transum as mine was 19 degrees and the most you can have is 16 , I have made mine 14 . I am very lucky as I am yard manager at a boat yard and have a Mercruiser dealer on sit