Boatmad.com


roflhat roflhat is offline

Thundercat guy

Visitor Messages

Showing Visitor Messages 11 to 20 of 20
  1. Hennessey10
    What size Jets are you running mine are 145
  2. Hennessey10
    What size jets are you using mine are. 145
  3. Hennessey10
  4. Hennessey10
  5. Hennessey10
  6. Hennessey10
  7. Hennessey10
  8. Hennessey10
  9. Hennessey10
    I finally got my motor back together and went out and tested it. I am running the 70 Yamaha carbs on my Tohatsu 50. I linked the carbs and set the fuel mixture to about 1 1/2 turns out. The motor bogs down when taking off and is hard starting. I had it easy to start and sounded good in a barrel. My main jets are 145. Do you have any advice you could share on where to go or what to look at from here. I have the jet ski fuel pump as well. The carbs have been rebuilt and I'm running the same coils as you did. Thanks for your help. Also how long does it take to set the rings? I'm running the TSR head. I checked compression and it is. 135,115,100. I only had it out onetime. It still has the stock Pistons with new rings and a freshly honed cylinders.
  10. Jimbob01
    15-10-2015 09:34 AM
    Jimbob01
    Hi rolfhat was the Ron hill chop on a standard tohatsu 30?
    Do you know if they are the same hub length/spline as the 6e9 mariner/Yamaha 30? Jim

About Me

  • About roflhat
    Country:
    Scotland
    Biography
    Naval Architecture
    Location
    Isle of Lewis
    Boat
    Thundercat
    Occupation
    Skipper
    Engines(s)
    Yamaha 70ces

Statistics

Total Posts
Visitor Messages
General Information
  • Last Activity: 27-03-2024 08:37 AM
  • Join Date: 30-04-2014

All times are GMT +1. The time now is 01:46 PM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×