Activator 27 Open Race (NEW)

[Arrow830]

Swedish built Activator 27x7ft. Mark Schnepf design (Rage Powerboats, NY).

Twin step bottom.

Divinycell core freeboard and deck. Single skinn bottom. Setup for single inboard OR outboard.

ca 750kg.

Includes:
- Cockpit floor
- Topcoted engine room
- Stainless Stell fuelcell 250L with vent.
- 4st flushed lifting cleats
- Deck rail
- 4st grabhandle
- Thru hull outlets X3
- Bow eye
- Gelcote color at your choice

Built by Zand Marine, Stockholm, SWEDEN. +4670-756 84 72.

30500eur (for a race boat -5%)


PM for more info

Mange

The white boat will be raced by Tony Sylsjö #194 in Swedish class "UL".

[scottyboy]

That is a good lookin boat!

[Arrow830]

Originally Posted by scottyboy

That is a good lookin boat!

Thank you Scottyboy!

The Bat 23 you have aren't not bad either!

[Arrow830]

Hi guys,

The boat will come out of molds next week and the first white one will be picked up by its owner.

I really don't know If you got any race class where this size of boat fit?
The boat could be set up for outboard, single or twins.

boat no1:

[Mike_G]

Looks like a nice marathon E class boat for me :-)

[Hydrostream]

Very Nice! I was looking at these on Facebook the other evening, who is building them, you guys?

You have any more build pictures, just curious really, they look really good..

Alan

[Arrow830]

Originally Posted by Mike_G

Looks like a nice marathon E class boat for me :-)

Originally Posted by Hydrostream

Very Nice! I was looking at these on Facebook the other evening, who is building them, you guys?

You have any more build pictures, just curious really, they look really good..

Alan

Thank you Gentlemen's!

The 27's are built by Fredrik Zander/Zand Marine Stockholm. Me and Fredrik have over a few years been talking about a good 27-28 hull to be base for a cockpit boat. When RAGE Powerboats in NY offered me to buy their 27 mould set I pulled the trigger. Mark at RAGE installed the step mould inlay from the 30ft Activator/Rage. It has an different design than the old step inlay from the older 27. The step angle backwards, larger air intakes and also a block-off that stop air going out to the other side of step.
The cockpit deck plug are on going as we speak. Will be a seamless design, CP designed and built with the UIM guidelines in mind. Two roof hatches that allow a 2+2 seat setup for pleasure use if needed. The cockpit boat will be just around 28ft.
Meanwhile we want a couple of 27's Open race deck out on the race course. The one in the pictures will be raced in Swedish national stock inboard class UL (430hp). And the 2:nd will be raced...? Marathon E-Class? .... it would be very exciting and intresting to see a 27 in the GB/UK waters

I may put some build pics up later on.

(sorry for my "english" - but I'm a Swede )

Mange

[Hydrostream]

Originally Posted by Arrow830

Thank you Gentlemen's!

The 27's are built by Fredrik Zander/Zand Marine Stockholm. Me and Fredrik have over a few years been talking about a good 27-28 hull to be base for a cockpit boat. When RAGE Powerboats in NY offered me to buy their 27 mould set I pulled the trigger. Mark at RAGE installed the step mould inlay from the 30ft Activator/Rage. It has an different design than the old step inlay from the older 27. The step angle backwards, larger air intakes and also a block-off that stop air going out to the other side of step.
The cockpit deck plug are on going as we speak. Will be a seamless design, CP designed and built with the UIM guidelines in mind. Two roof hatches that allow a 2+2 seat setup for pleasure use if needed. The cockpit boat will be just around 28ft.
Meanwhile we want a couple of 27's Open race deck out on the race course. The one in the pictures will be raced in Swedish national stock inboard class UL (430hp). And the 2:nd will be raced...? Marathon E-Class? .... it would be very exciting and intresting to see a 27 in the GB/UK waters

I may put some build pics up later on.

(sorry for my "english" - but I'm a Swede )

Mange

Very cool, looking forward to the pics! And your english is perfect!

[Arrow830]

The 2:nd boat is almost ready for delivery
race price is 26700eur.
includes:
- rigid rubrail
- fuel tank
- 4 race/lifting cleats (powder coated black)
- 1 deck rail (powder coated black)
- 2 thru hull outlets (powder coated white)

for outboard or inboard


Mange

[Arrow830]

Originally Posted by Arrow830

The 2:nd boat is almost ready for delivery
race price is 26700eur.
includes:
- rigid rubrail
- fuel tank
- 4 race/lifting cleats (powder coated black)
- 1 deck rail (powder coated black)

2:nd boat is still avaible.

Here's a photo of the first 27 Activator from past race weekend

[Paul E]

Beautiful boat!! What power and performance on the existing hulls?

[Arrow830]

Originally Posted by Paul E

Beautiful boat!! What power and performance on the existing hulls?

Thanks Paul E!

It's a 496HO/425hp stock with stock Bravo drive w/o nose cone.
28" 5 blade Hydromotive. Yesterday on dead flat he was right on 68 knots. With some more testing/props etc I expect 73-74 knots or even faster.

The boat was ready just hours Before past saturdays race..

Mange

[Arrow830]

Hi guys!

We still have the 2nd all White boat for sale
race price is 26700eur.
includes:
- rigid rubrail
- fuel tank
- 4 race/lifting cleats (powder coated white)
- 1 deck rail (powder coated black)
- 2 thru hull outlets (powder coated white)
for outboard or inboard

Also want to share a few pics of the "Army/Navy"-style 27

[Paul E]

Stunning!! Where do you get those recessed cleats from?

[Arrow830]

Originally Posted by Paul E

Stunning!! Where do you get those recessed cleats from?

Thank you again Paul

The cleats are actually our own design. We sell them in set of 4 with backing support plates as well
Easy to hook them up to for example hullstringers etc as well


Mange

[pugracer285]

Love the boat!

May I have some dimensions of your lifting cleats. I am looking for a solution on the front of my cat. Also how do you tie them into the stringers below decks, do you use the typical threaded bar and brace?

I'd only want 2 though (in Pollished stainless) as I've just had some rear lifting eyes made up.

Any ideas of cost? (inc postage to Southampton UK)


Thanks
James

[Paul E]

Originally Posted by pugracer285

Love the boat!

May I have some dimensions of your lifting cleats. I am looking for a solution on the front of my cat. Also how do you tie them into the stringers below decks, do you use the typical threaded bar and brace?

I'd only want 2 though (in Pollished stainless) as I've just had some rear lifting eyes made up.

Any ideas of cost? (inc postage to Southampton UK)


Thanks
James

James if the price is reasonable I'll split a set of four with you?

[Arrow830]

Originally Posted by Arrow830

Hi guys!

We still have the 2nd all White boat for sale
race price is 26700eur.
includes:
- rigid rubrail
- fuel tank
- 4 race/lifting cleats (powder coated white)
- 1 deck rail (powder coated black)
- 2 thru hull outlets (powder coated white)
for outboard or inboard

Today we had some testing with Tony Sylsjö's Activator Some balance and some other things we had sorted out.
The motor is a bone stock 496HO with stock exhaust and standard Bravo w/o cone. 4800rpm and 70.2 knots so far
The boat going to race on saturday. Still have the 2nd White boat for sale!

Here's a few pics of Tonys boat from today. Going to put a vid up later.

[Arrow830]

the 2nd White boat is now sold! Feel free to Contact me if you want a race Activator. Still want to see a o/b version of this boat out on the race course

[Arrow830]

Have a set of 4 complete polished safety cleats with back support plate if somebody need. Ready to ship.

A black cleat look like this when installed (can be hooked to bottom stringers etc)