Phantom 20 total rebuild

[patrick d]

Looked like a nice phantom 20 before you cut the back off.

[grandmas denture]

... special ikea bow bumping transom extension named snorre

[Zander]

Originally Posted by patrick d

Looked like a nice phantom 20 before you cut the back off.

No it was very rotten in the transom and the floors.

[Zander]

Originally Posted by grandmas denture

... special ikea bow bumping transom extension named snorre

Lol!

The Box is something I had to make in order to be able to race her in Sweden in the national V-300 class!

[Zander]

Progress here in Sweden! She will hopefully hit the water in May

Whats left to do is to install the Steering, do all the wiring, put in the fueltank that is under construction. Put on the gearcase. Install all the SmartCraft. Put in the seats again.
Lots of small things but mostly fun stuff

[Zander]

First testdrive this weekend. She ran absolutely great! The hull felt really rigid, the engine is wicked strong. The Capilano/Mayfair steering was solid as a rock.
The only thing that wasnt very good was my driving lol. This is my first performance boat so I much to learn. Struggled with the chinewalking abit but after 2hours in the seat I start to get the hang of it abit. Tested a Tempest 25" and a Raker 26". Topspeed (with me cutting of the throttle cus of chinewalking) was 83 mph. Revving 6500 isch, still have 500 revs left
Should not be a problem.

Some pics and a short movie of me doing a driveby. 14 m/s gustwinds so no easy job balancing her on the "pad"

https://www.facebook.com/victor.labe...1/?pnref=story

[Zander]

For those of you who are in doubt of the speed

"Max fart" is topspeed. I know it sounds funny in english

[Carrera]

Nice! Looks very good!

Not bad speed at all for your first test drive. Should be rather competitive with that kind of speed. In case you want to tame the chinewalk a bit try a 4-blade prop. Might be slightly slower but a lot easier to keep the boat steady so your average speed might well increase