Quote:
Originally Posted by steffenland
Hi,
Can anyone tell me whats these cracks are? cracks in the gelcoat/paint or are they structural damage?
They are running along about 2 meters of the hull on both sides about mid ship, I pressed against it and it seemed like the area where a little soft, but I dont got anything to compare it with so I dont know, any comments?
|
I'm no expert but from what I have seen in these hulls is that is most likely paint cracking from flex.
I noticed most twisters have thicker core (or only core) half way up from pictures I have seen. This would cause the sides to flex in the area you are pointing out.
Look on the inside, if you see cracks inside you have a problem. If its just on the outside you should be ok. But without better pictures I cant be 100% sure.
Just my 2 cents for what its worth.