Originally Posted by Marc
Hi scand I was looking at the berserk designs website.What sort of speed can that rib with the evinrude motor produce?
Thanks for taking an interest Marc. Did you mean the open or the decked rib?
The top speed depends on set-up, if set-up for top speed, we hope the decked version will approach a speed of 60knots. The open rib will be a bit slower as it not as aerodynamic efficient.
I will be building a hard version (no tubes, attached) this winter, if things go according to plan, and should be able to tell more when this is tested.
Have spent a lot of time on the drawing board trying to get as much speed as possible out if this hull without sacrificing the rough water performance.
Testing will show if it works or not....