Hi guys
Just purchased a 21 foot boat, believe to be a Marshan or Ring (please correct me if wrong) The vessel was in Sovereign Harbour for few years and originally rigged with a 200 optimax which we switched with the current engine on to a white Phantom 21. Can’t find a date or HIN but vessel has been sprayed black, originally white deck with a yellow hull gelcoat.
The vessel was sold last year and sadly not looked after to her best, poor cover and increased rain water resulted in her sinking to the bottom of the marina. The marina salvaged the vessel, splitting the aft port side in the process and sold the vessel on legal grounds.
Enter me, the proud new owner with some ambitious plans as finishing a university degree in Yacht Manufacture so putting some theories in practice. Part of this, other then repairing the hull sides will be a new interior structure replacing the plywood currently in place. In a similar manner to the Ocke Mannerfelt Batboats, coring foam will be bonded to the hull with a urethane acrylate to form the structure and laminated over with biaxial and epoxy resin.
Sadly only been able to de-rig the vessel and put the hull on the beach, not ideal place to work on the vessel but no other options available. though hoping to prep the sides and remove the flooring soon to then plan the next stage.
Photos posted on
http://TStone42.photosite.com/
__________________