Boat footprint

[Ring Owner]

I finally have the go ahead from my better half to look at upgrading my Ring 18 but due to limited space I need to do some rearranging of the garden to fit two boats into it first.

Could someone please give me the general length/beam of say a 21ft Ring/Phantom ON the trailer. So it would be tow hitch to prop ideally plus the beam.

I am only looking at general sizes so I can start some landscaping over the summer - if there is one!!!

Cheers

[russ williams]

Originally Posted by Ring Owner

I finally have the go ahead from my better half to look at upgrading my Ring 18 but due to limited space I need to do some rearranging of the garden to fit two boats into it first.

Could someone please give me the general length/beam of say a 21ft Ring/Phantom ON the trailer. So it would be tow hitch to prop ideally plus the beam.

I am only looking at general sizes so I can start some landscaping over the summer - if there is one!!!

Cheers

I would give yourself 27ft x 8ft
Maybe a bit smaller but all depends on length of trailer draw bar and engine

[gar163y]

Originally Posted by russ williams

I would give yourself 27ft x 8ft
Maybe a bit smaller but all depends on length of trailer draw bar and engine

Just about right.

Measured my Ring 21c and it's 27'6" from hitch to trailer board. The engine is mounted on a 10" CMC manual jack. The width is 7'.

[Ring Owner]

Thanks for that Gents

It will give me something to work with when I get back home.

The problem will be that I have a corner plot on a slope, so looks like I could have to do some digging!!

Cheers
Dave