evinrude 150 2003
Hi,Fist time on this forum so be kind.Technical question.My engine has done 23 hrs used it yesterday for first time since it anual service which was done in oct .Full service done including water pump.I had to have the gearbox oil done again last week before i used it as they had left the drain screw loose and over last few months it had drained out onto grass.Used it yesterday before we came back in notice the tell tale water jet wasnt actually spouting out of the centre but out of what i thought to be the top exaust vents/pipes eighter side of the tell tale at a rate of looking at a hose pipe at half pressuse out of each spout.I have unscrewed thetell tale outlet to find a largeish piese of metal swarf looks like the curlly bits left after you have been drilling a hole in metal.I have looked at the bottom legs and the vent are intact and this peice seems to big to pass through .So did this get into the water ways when engine was apart on their workshop floor and block the hole and cause the water to come out of the exaust .Or has the impelar housing or parts broken up.Please help with the probable posibilities thanks Peter R
__________________
__________________
Regards Peter
|