how to connect a 3rd tank to a smartcraft system?

Ph@ntastic · 31-05-2010, 06:45 PM

Can anyone help me on how to connect a 3rd tank to a smartcraft system ?
I have a SC1000tacho and SC1000speedo and a SC5000 on wich i have the fuel tank and oil tank connected , now i want to hookup the 2nd fuel tank in the bow to the system but don't know how to do this .
Any help would be welcome , and if you have a connection drawwing that would be awesome !

(sory for the bad spelling ....)

Kind regards , Jurry

Ph@ntastic · 05-06-2010, 01:46 PM

83vieuws and no one that can point me in the right direction

boatnut · 05-06-2010, 01:58 PM

Quote:

Originally Posted by Ph@ntastic

83vieuws and no one that can point me in the right direction

to many wires

Cookee · 06-06-2010, 08:34 AM

I looked but I'm not sure it's possible - if I remember from the last Opti I wired up there is only one wire for a fuel tank - if you trace the fuel tank sender cable back to the loom it would be marked as tank 2 or fuel tank - it's worth a look.

Ph@ntastic · 06-06-2010, 09:15 AM

Thanks Cookee , folowing the wire is not a problem at the moment because the floor is out of the boat as is the fuel tank ........
I will imform you if there is a second wire for an optional tank .

dirtydutch · 06-06-2010, 08:36 PM

Quote:

Originally Posted by Cookee

I looked but I'm not sure it's possible - if I remember from the last Opti I wired up there is only one wire for a fuel tank - if you trace the fuel tank sender cable back to the loom it would be marked as tank 2 or fuel tank - it's worth a look.

in the menu on the tach is the oil tank marked as fuel tank 2.