2.4 200 sleeve wanted

grandmas denture · 09-09-2013, 11:45 AM

... id also take a blown empty block with at least 1 good sleeve
... not that bad, if thered be a good piston inside the sleeve

thanks &

Techteam · 09-09-2013, 06:22 PM

2.4 200's were chrome bore no sleeves. Sleeves are available but you need to change rings. The sleeves are quite thin and are difficult to extract if they have been fitted properly. I wouldn't recommend re-using a 2.4 sleeve.

grandmas denture · 09-09-2013, 07:03 PM

... sleeve is about 3~4mm thick

mojo?offshore · 09-09-2013, 08:51 PM

Hi.
LOOK

AT MY POSTING ON PAGE 50, REF CYLINDER SLEEVES.
REGARDS,
MOJO?OFFSHORE,

scooby_hugh · 11-09-2013, 02:47 PM

might be worth speaking to these guys

http://www.ebay.co.uk/itm/MERCURY-MA...item337009b336

grandmas denture · 24-03-2014, 07:41 PM

... still wanted a used steel sleeve 2.4 200 from ~1985 red band
... id also take a blown empty block with at least 1 good sleeve
... not that bad, if thered be a good piston inside the sleeve

thanks &

Hydrostream · 24-03-2014, 09:03 PM

I have a whole 2.4 200 powerhead if youre interested. Runs good & Cheap!
Needs starter looking at, probably strip and clean brushes.

grandmas denture · 25-03-2014, 09:42 AM

Quote:

Originally Posted by grandmas denture

... from ~1985 red band ...

... sorry, thin red band, so engine is 1986~88