2.5 260 15inch offshore mid

[1666perry]

Hello All ,

Just considering selling my 2.5 260 with 15inch off shore mid and cle gear box.

Has jsre 1inch inlet spacer
Jsre resin reeds
Port and Polished
Orignal 280 cowlin

Apparently freshly rebuilt engine by hutchings before i purchased this engine but no documents to support this. Compression is good on all cyclinders. I have done approx 8h and runs well.This engine hasnt been raced due to the boat build taking place. The new owner will be able to hear engine running.

Looking for £4500, open to offers. Possible looking for 150 opti or evinrude h.o on px.

[Red dragon]

Originally Posted by 1666perry

Hello All ,

Just considering selling my 2.5 260 with 15inch off shore mid and cle gear box.

Has jsre 1inch inlet spacer
Jsre resin reeds
Port and Polished
Orignal 280 cowlin

Apparently freshly rebuilt engine by hutchings before i purchased this engine but no documents to support this. Compression is good on all cyclinders. I have done approx 8h and runs well.This engine hasnt been raced due to the boat build taking place. The new owner will be able to hear engine running.

Looking for £4500, open to offers. Possible looking for 150 opti or evinrude h.o on px.

Who did you buy it off?

[1666perry]

I bought it from "the rat" it was on a p18 "roofless" i believe his name was Paul. I'm sure some of you will know him. Blackpool way.

[1666perry]

Apparently freshly rebuilt engine before i purchased this engine but no documents to support this. Compression is good on all cyclinders. I have done approx 8h and runs well.This engine hasnt been raced due to the boat build taking place. The new owner will be able to hear engine running. *removed name due to incorrect information - hutchins IS NOT the engineer who rebuilt this engine, i was mis-informed.

[beyondhelp]

Apparently freshly rebuilt engine before i purchased this engine but no documents to support this.

Then this must be ignored by any sensible potential buyer, and it must be assumed it did not happen unless there is evidence to suggest otherwise.

Leak down test and compression test, and heads off as a minimum on an engine in this price range.

[Gman]

You got it from the rat or have you received stolen goods from the rat 😕😕😕😕😕

[1666perry]

Ummm.. well I paid good money in good faith so I should think not. I understand some people have some issues with him but please keep your comments to your self unless your making any offers.

[1666perry]

Yes inspection welcome , leak down test and compression are all reading well. I'm open to offers as im looking to go into f3 ski racing. Mid / cowl / gear box must be worth 2k lets say i take 3.75-4k £1750 for powerhead isnt a bad purchase. ��

[1666perry]

Tested compression all cylinders results was at 150 psi.

[Wallby202]

Hi there have you any pictures you could send me please and where are you for pick up,

[1666perry]

Originally Posted by Wallby202

Hi there have you any pictures you could send me please and where are you for pick up,

Please send me an email address.

[delcak705]

i also have a 150 xr4 power head if u want
to
work
out a deal