|
|
30-12-2011, 02:41 PM
|
#1
|
Registered User
Country: UK
Location: Weston Super Mare
Occupation: Electrical Engineer
Join Date: Mar 2004
Location: Weston Super Mare
Posts: 6,351
|
700xs for sale
Selling my 700xs bare hull. build pictures and details can be seen here http://www.boatmad.com/forum/showthread.php?t=13359 and more pictures here http://www.boatmad.com/forum/showthread.php?t=18166
Selling due to some glass work needed on floor and i don't have the skills nor motovation to repair it so decided to sell.
Hull was built in 2009 with no expense spared. bow tank drain pipe broke last time out so fuel tank and floor was removed to repair it when the damage to the hull was then revealed, see pictures below
Bare boat inc. centre console £ 2000 ono priced to sell as want it gone
could come with any or all of the following depending on monies
180ltr stainless steel fuel tank (powder coated blue) with polished stainless steel clamp
Polished stainless steel transom plate (for twins)
tie bar transom assembly for extra strength polished stainless
cyco custom aluminium billet battery tray powder coated blue
cyco custom billet aluminium trim tabs (powder coated blue)with custom rams ( powder coated white) and bennett pumps
cyco custom polished stainless steel bow tank pick up
Cyco custom quad shifters polished stainless
Kings upholtsery custom brand new cover (see picture)
Other bits also possible please contact me to discuss, this is a serious advert so please refrain from asking questions other than about this boat and sale details.
Thanks for looking.
__________________
|
|
|
30-12-2011, 07:17 PM
|
#2
|
Registered User
Country: england
Location: surrey
Engines: none at the mo
Cruising area: south coast
Join Date: Dec 2011
Location: surrey
Posts: 472
|
700 xs
Quote:
Originally Posted by Burty
Selling my 700xs bare hull. build pictures and details can be seen here http://www.boatmad.com/forum/showthread.php?t=13359 and more pictures here http://www.boatmad.com/forum/showthread.php?t=18166
Selling due to some glass work needed on floor and i don't have the skills nor motovation to repair it so decided to sell.
Hull was built in 2009 with no expense spared. bow tank drain pipe broke last time out so fuel tank and floor was removed to repair it when the damage to the hull was then revealed, see pictures below
Bare boat inc. centre console £ 2000 ono priced to sell as want it gone
could come with any or all of the following depending on monies
180ltr stainless steel fuel tank (powder coated blue) with polished stainless steel clamp
Polished stainless steel transom plate (for twins)
tie bar transom assembly for extra strength polished stainless
cyco custom aluminium billet battery tray powder coated blue
cyco custom billet aluminium trim tabs (powder coated blue)with custom rams ( powder coated white) and bennett pumps
cyco custom polished stainless steel bow tank pick up
Cyco custom quad shifters polished stainless
Kings upholtsery custom brand new cover (see picture)
Other bits also possible please contact me to discuss, this is a serious advert so please refrain from asking questions other than about this boat and sale details.
Thanks for looking.
|
thats cheap for a split in half boat ?
__________________
|
|
|
30-12-2011, 11:26 PM
|
#3
|
Registered User
Country: engalnd
Location: south west
Interests: ski racing
Boat name: Jack'd up, hellraiser
Boat make: Bernico 19 ET, ring 16
Engines: merc 135, merc 175, yam 90
Cruising area: Plymouth
Join Date: Jun 2006
Location: south west
Posts: 1,176
|
Definitely not split in half
|
|
|
31-12-2011, 12:03 AM
|
#4
|
Registered User
Country: England
Location: South West
Occupation: Development engineer
Interests: Fast boats
Boat name: Xtreme
Boat make: Bernico 21
Engines: Mercury F1, 300 Drag, XR2 "Fingerported"
Cruising area: South West
Join Date: Mar 2004
Location: South West
Posts: 1,043
|
Quote:
Originally Posted by deepvee
thats cheap for a split in half boat ?
|
Great first post d**khead
|
|
|
31-12-2011, 12:56 AM
|
#5
|
Registered User
Country: England
Occupation: I have 1!
Boat name: vodka express/smoking aces
Boat make: liberator 221/extreme 24
Engines: 7.4 v8 8.2 v8
Cruising area: Portsmouth
Join Date: Jul 2009
Posts: 457
|
Quote:
Originally Posted by Cyco
Great first post d**khead
|
Makes it even cheaper then..... 2 boats for the price of 1!!!
|
|
|
31-12-2011, 11:27 AM
|
#6
|
JORDANIEL
Country: ENGLAND
Location: WEST MIDLANDS
Occupation: paying my kids bills
Interests: BOATS,MOTORCROSS,JET SKIS AND BEER LOTS OF BEER
Boat name: SIDEWINDER
Boat make: PHANTOM 20
Engines: XR2 MERCURY
Cruising area: BARMOUTH
Join Date: Aug 2009
Location: WEST MIDLANDS
Posts: 163
|
At least he has said what's wrong with it and shown pic's some fooking low life's would say nothing and sell it for twice as much
__________________
If It's got wheels or tits your gunna have trouble with it
|
|
|
31-12-2011, 02:18 PM
|
#7
|
Registered User
Join Date: May 2009
Posts: 496
|
After the amount of repairs on my Cougar, doesn’t look that bad to repair for someone with a bit of experience of glassing up. If that is all that’s wrong with it I would have thought that could be repaired for £100 in materials and two days work. I’m surprise you have not done it yourself, would have thought it would make fare more money repaired. Looks like a nice boat, good luck with your sale.
|
|
|
31-12-2011, 04:20 PM
|
#8
|
Registered User
Country: UK
Location: Weston Super Mare
Occupation: Electrical Engineer
Join Date: Mar 2004
Location: Weston Super Mare
Posts: 6,351
|
Cant do fibreglass work dude and as i said just want it gone. so if it means selling it cheap then so be it
|
|
|
31-12-2011, 04:45 PM
|
#9
|
Registered User
Join Date: Oct 2010
Posts: 21
|
private message sent send me your number please
|
|
|
03-01-2012, 11:00 AM
|
#10
|
Registered User
Country: UK
Location: Weston Super Mare
Occupation: Electrical Engineer
Join Date: Mar 2004
Location: Weston Super Mare
Posts: 6,351
|
I've had a load of messages asking for more pictures of the damage with sizes etc and info of what else is available so i thought i'd list it all out.
Bare Hull including centre console £ 2000 ono
Custom 180ltr stainless steel fuel tank with sump to fit into floor. £ 100
polished stainless steel clamp for tank. £ 50
tie bar transom assembly for extra strength polished stainless £ 50
cyco custom aluminium billet battery tray powder coated blue £ 50
cyco custom billet aluminium trim tabs (powder coated blue)with custom rams ( powder coated white) and bennett pumps £ 500
cyco custom polished stainless steel bow tank pick up ( only type that will fit due to the step. £ 100
Kings upholtsery boat cover custom made 2011 £ 350
Bernico style seats, with kevlar casings £ 500
Cyco 3 way trim indicator fitted to tabs no cable or sender for engine. £ 50
cyco custom ski pole polished stainless, made to fit boat. £ 100
cyco custom polished stainless lifting eyes £ 50
loads of other little bits can be left in if required, grab handles, bilge pump, hoses, breathers, fittings etc valued at £ 350
Its basically a complete boat at the moment less engines, gauges, steering, shifters and foot throttle. Whoever buys is welcome to take whatever extras they require at the stated prices (negotiable) or if not once the hull has gone then certain bits that I don't need will be available.
I'd suggest that if you are considering buying then you should also buy the tabs, tank / clamps, bow tank pick up and maybe the ski pole as trying to get anything else to fit will be a lot more expensive than using these bits.
|
|
|
03-01-2012, 01:56 PM
|
#11
|
Senior Member
Country: UK
Location: Devon
Occupation: Garage Proprietor
Interests: PowerBoat Racing
Boat name: If Only
Boat make: Bernico F3 OCR, Bernico Prototype Inboard, and some Ribs
Engines: Yamaha Pro V 115
Cruising area: UK, France
Join Date: Jan 2005
Location: Devon
Posts: 3,095
|
Looks very reasonable Burty !! What are you going to replace it with ??
__________________
If Only
National Outboard Immersed Propeller Mono Record 103mph
|
|
|
03-01-2012, 02:13 PM
|
#12
|
Registered User
Country: UK
Location: Weston Super Mare
Occupation: Electrical Engineer
Join Date: Mar 2004
Location: Weston Super Mare
Posts: 6,351
|
couple of complete pictures so you can see how nice it is
|
|
|
03-01-2012, 02:25 PM
|
#13
|
Registered User
Country: UK
Location: Weston Super Mare
Occupation: Electrical Engineer
Join Date: Mar 2004
Location: Weston Super Mare
Posts: 6,351
|
Quote:
Originally Posted by Burty
this is a serious advert so please refrain from asking questions other than about this boat and sale details.
|
Quote:
Originally Posted by OCRDA
What are you going to replace it with ??
|
Thanks Bob!! But I've sent you a PM
|
|
|
12-01-2012, 05:13 PM
|
#14
|
Registered User
Country: UK
Location: Weston Super Mare
Occupation: Electrical Engineer
Join Date: Mar 2004
Location: Weston Super Mare
Posts: 6,351
|
Right, I really need this gone so how about
Hull including centre console
Custom 180ltr stainless steel fuel tank with sump to fit into floor.
polished stainless steel clamp for tank.
tie bar transom assembly for extra strength polished stainless
cyco custom aluminium billet battery tray powder coated blue
cyco custom billet aluminium trim tabs (powder coated blue)with custom rams ( powder coated white) and bennett pumps
cyco custom polished stainless steel bow tank pick up ( only type that will fit due to the step.
cyco custom polished stainless lifting eyes
All for £ 2500
|
|
|
21-01-2012, 11:34 AM
|
#15
|
Registered User
Country: UK
Location: Weston Super Mare
Occupation: Electrical Engineer
Join Date: Mar 2004
Location: Weston Super Mare
Posts: 6,351
|
Needs to go, got to be out of dry storage within 2 weeks, £1750 ono,
no battery tray though but all of the above still there
|
|
|
21-01-2012, 12:01 PM
|
#16
|
Registered User
Country: Job Centre
Location: In a box
Occupation: Chaos's gofer
Interests: Skiving
Boat make: Spectre 30
Engines: 2 x Promax 225
Cruising area: In the bath
Join Date: Mar 2004
Location: In a box
Posts: 5,201
|
That sounds a real bargain, can't believe no one has bought it. I'd be tempted myself, if I didn't have so many projects on the go!
__________________
Chaos for Moderator.
|
|
|
21-01-2012, 09:29 PM
|
#17
|
Registered User
Country: Netherlands
Location: Harderwijk
Occupation: See my website ;)
Interests: duh ......
Boat make: Seaquel 600XS & Seaquel 700XS
Engines: Merc 300XS
Cruising area: Veluwemeer/Ijsselmeer
Join Date: Dec 2006
Location: Harderwijk
Posts: 421
|
Its a bargain thats for sure , would love it next to the 600XS but its a longe and expensive drive to pick it up and i don't have a spare trailer
|
|
|
21-01-2012, 11:36 PM
|
#18
|
Registered User
Country: UK
Location: Weston Super Mare
Occupation: Electrical Engineer
Join Date: Mar 2004
Location: Weston Super Mare
Posts: 6,351
|
borrow one dude, come on you know you want to....
|
|
|
22-01-2012, 12:12 AM
|
#19
|
Registered User
Country: UK
Location: Weston Super Mare
Occupation: Electrical Engineer
Join Date: Mar 2004
Location: Weston Super Mare
Posts: 6,351
|
I can deliver if you like dude.
|
|
|
22-01-2012, 10:28 AM
|
#20
|
Registered User
Country: GB
Location: Surrey
Occupation: Architectural Designer and Ski Racer
Boat name: True Colours
Boat make: Cyclone 21'
Engines: Mercury 300xs
Cruising area: Worldwide
Join Date: Oct 2005
Location: Surrey
Posts: 320
|
Quote:
Originally Posted by Ph@ntastic
Its a bargain thats for sure , would love it next to the 600XS but its a longe and expensive drive to pick it up and i don't have a spare trailer
|
when you think of what the boat is actually worth, with the amount of kit burty's throwing in with it, the journey will cost nothing at all! its a ridiculously cheap boat for that money! ok so there's a tiny little repair to be done but as has already been said that's hardly a bank breaker either!
(doing my best to help sell it rob! haha)
__________________
|
|
|
|
|
Thread Tools |
|
Display Modes |
Linear Mode
|
Posting Rules
|
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts
HTML code is Off
|
|
|
|
» Recent Threads |
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|
|