Needs 3 bolts tapping out that have snapped upon removing steering wheel
The CRT has been dunked but still has plenty of life, All the yamaha trim switches where new after last sinking.
This allows the use of conveniently placed trim buttons on hydroulic steering boats without the need to un-coil the trim wires every 5 minutes when your steering creepes
There is a bit of surface corrossion as you can see in pics.
Steering wheel was i think a stainless marine one..all good kit.
This set up new costs over £800 plus a very friendly machinist!
this set up is absolutely bullet proof strong and will never allow you to miss trim especially when cornering.
CRT has 2 spare holes that could be used for a jack plate too.
The brushes are virtually new.
fits a standard 1 in 3 marine taper with single keyway shaft.i.e.seastar,baystar,ultraflex,teleflex,mayfa ir etc etc
£300 or £340 with all broken bolts tapped and new bolts supplied!