Boatmad.com


Reply
 
Thread Tools Display Modes
 
Old 10-01-2020, 12:53 PM   #1
Senior Member
 
Pennpromo's Avatar
 
Country: UK
Location: Christchurch, Dorset
Occupation: Marine Engineer-ish
Interests: Boats, Cars.
Boat name: Splash 4
Boat make: Hunton
Engines: Mercruiser 640
Cruising area: Poole, Solent

Join Date: Feb 2005
Location: Christchurch, Dorset
Posts: 599
Hull Clear Out !

So having a clear out of various bits as we are moving:
1). Avenger 16 on 2 wheel trailer, Suzuki 115 made to look like a Mercury Blue Band. Good overall cover, painted pale blue Hempel, Mk1 so quite rare. Almost ready to run,lots of new parts, just needs putting together.
2). Avenger 34, hull and deck with fuel tanks and many stainless and other bits. Needs loads of work but hull is sound. Transom cut for TRS drives.
3). Extreme 21 moulds. seen many, many pulls but still very usable.
4). Feline 12ft Minicat on 2 wheel trailer with electric start Merc 25. Carbon deck, polypropylene seats, quite good fun !
5). Honda 225, long shaft ex Cougar 27 race engine, twin Latham steering, helm unit, hoses. Only just over 100 Hrs, low water pickup, gauges, loom etc.
6). Yellow Frode 19, Tandem seats, Yamaha 90, low water pickup, new carbon kevlar seats and upholstery, good 2 wheel trailer, overall cover. Gearbox recently rebuilt by Geoff Purves. 2 props, compass, underfloor fuel tank, small battery. Great little race boat for 3A/B. Ex Vulture Ventures, anti stuff fins, raced by me in 1996. Vented spray rails and notch. Lifting strops etc. Would be perfect with a 115 Promax ...
Most are on Ebay for pictures.
Happy to chat about any of the above and open to sensible offers: 07740 900227. Simon
__________________

Pennpromo is offline   Reply With Quote
Old 10-01-2020, 12:56 PM   #2
Senior Member
 
Pennpromo's Avatar
 
Country: UK
Location: Christchurch, Dorset
Occupation: Marine Engineer-ish
Interests: Boats, Cars.
Boat name: Splash 4
Boat make: Hunton
Engines: Mercruiser 640
Cruising area: Poole, Solent

Join Date: Feb 2005
Location: Christchurch, Dorset
Posts: 599
More stuff !

I also have lots of unused composite materials.
Carbon twill fabric.
Heavy Carbon mat
Kevlar Unidirectional
Carbon Unidirectional
Lots of 300 and 600 CSM
Lots of 2/3/4/5 MM core material.
Loads of Nomex honeycomb offcuts in various shapes and sizes.
2 X freezers full of pre-preg carbon which is out of date but perfectly usable, cures at 80 degrees.
__________________

Pennpromo is offline   Reply With Quote
Old 10-01-2020, 01:03 PM   #3
Senior Member
 
Pennpromo's Avatar
 
Country: UK
Location: Christchurch, Dorset
Occupation: Marine Engineer-ish
Interests: Boats, Cars.
Boat name: Splash 4
Boat make: Hunton
Engines: Mercruiser 640
Cruising area: Poole, Solent

Join Date: Feb 2005
Location: Christchurch, Dorset
Posts: 599
Motors etc.

I have all sorts of broken Evinrude 250 HO, ex P1 parts, some good some bad.
Saddles, trim units, blocks, looms, electrics.
Various Yamaha 90 parts, inc blocks, reed chests etc.
All sorts of assorted props, I will try to list them all.
Some Greytronics intercoms with old and new style plugs
Deck hatches, skin fittings.
4 X small (5L?) dive bottles with demand valves etc for canopy boats, all as new.
General deck hardware, bilge hose, water hose.
Several Unwin high pressure hydraulic pumps, suitable for drive trim or trim tabs.
Various broken transom lift parts.
Boat cradles, scaffolding.
Open to sensible offers on anything.
Pair of red sporty GRP seats, used but still very usable.
Pair of new and unused black steel framed bucket seats.
A couple of old GPS plotters.
Bouyancy bags, anchors, lines, fenders, pumps etc.
Lots of stainless parts: cleats, rails, U bolts, catches, hinges etc.
Outboard stand, takes 2 mid size engines.
Pennpromo is offline   Reply With Quote
Old 10-01-2020, 04:13 PM   #4
Registered User
 
boatnut's Avatar
 
Country: england
Location: surrey
Occupation: home extension specialist
Interests: boats, boats and more boats
Boat name: The Edge
Boat make: p21
Engines: 2.5 260
Cruising area: hayling island/littlehampton

Join Date: Jan 2010
Location: surrey
Posts: 888
Interested

Hi mate
Could you send me pics / details / prices please of frode and feline cat .
Cheers Reece To rfpyne@hotmail.co.uk
boatnut is offline   Reply With Quote
Old 10-01-2020, 04:34 PM   #5
Senior Member
 
Pennpromo's Avatar
 
Country: UK
Location: Christchurch, Dorset
Occupation: Marine Engineer-ish
Interests: Boats, Cars.
Boat name: Splash 4
Boat make: Hunton
Engines: Mercruiser 640
Cruising area: Poole, Solent

Join Date: Feb 2005
Location: Christchurch, Dorset
Posts: 599
Pictures

Frode and minicar pictures.
Frode now has Bob's nosecone on it after big rebuild last summer..
Simon.
Attached Thumbnails
Click image for larger version

Name:	IMG_0790.jpg
Views:	327
Size:	121.5 KB
ID:	50840   Click image for larger version

Name:	IMG_0791.jpg
Views:	189
Size:	132.6 KB
ID:	50841   Click image for larger version

Name:	IMG_0804.jpg
Views:	215
Size:	92.6 KB
ID:	50842   Click image for larger version

Name:	IMG_8678.jpg
Views:	195
Size:	113.7 KB
ID:	50843  
Pennpromo is offline   Reply With Quote
Old 10-01-2020, 05:00 PM   #6
Senior Member
 
Pennpromo's Avatar
 
Country: UK
Location: Christchurch, Dorset
Occupation: Marine Engineer-ish
Interests: Boats, Cars.
Boat name: Splash 4
Boat make: Hunton
Engines: Mercruiser 640
Cruising area: Poole, Solent

Join Date: Feb 2005
Location: Christchurch, Dorset
Posts: 599
Ring 20C

Just found a Ring 20C, it needs a new transom, we dug it out and have never finished it.
It was sanded down to paint, seems pretty sound elsewhere.
Boat only, no trailer.
£250 or offers.
Attached Thumbnails
Click image for larger version

Name:	IMG_3308.jpg
Views:	198
Size:	108.1 KB
ID:	50844   Click image for larger version

Name:	IMG_3309.jpg
Views:	199
Size:	75.3 KB
ID:	50845   Click image for larger version

Name:	IMG_3310.jpg
Views:	149
Size:	83.3 KB
ID:	50846   Click image for larger version

Name:	IMG_3311.jpg
Views:	151
Size:	86.7 KB
ID:	50847  
Pennpromo is offline   Reply With Quote
Old 10-01-2020, 05:04 PM   #7
Senior Member
 
Pennpromo's Avatar
 
Country: UK
Location: Christchurch, Dorset
Occupation: Marine Engineer-ish
Interests: Boats, Cars.
Boat name: Splash 4
Boat make: Hunton
Engines: Mercruiser 640
Cruising area: Poole, Solent

Join Date: Feb 2005
Location: Christchurch, Dorset
Posts: 599
More Pics

More pictures of the Frode.
Attached Thumbnails
Click image for larger version

Name:	IMG_2590.jpg
Views:	152
Size:	58.3 KB
ID:	50848   Click image for larger version

Name:	988404_734870096553853_1154194634_n-2.jpg
Views:	237
Size:	74.3 KB
ID:	50849  
Pennpromo is offline   Reply With Quote
Old 11-01-2020, 11:21 AM   #8
Registered User
 
The Docta's Avatar
 
Country: UK
Location: Coventry (but from Lee on Solent)
Occupation: Sales Director
Interests: My Boat of course
Boat make: Extreme 21
Engines: Merc V8
Cruising area: Solent

Join Date: Jul 2005
Location: Coventry (but from Lee on Solent)
Posts: 587
What are you after for the frode? Feel free to pm if you prefer. Thanks. Al
__________________
The Docta
The Docta is offline   Reply With Quote
Old 11-01-2020, 11:53 AM   #9
Registered User
 

Join Date: Oct 2007
Posts: 1,374
Have you checked your loft out you might have another boat up there
hunton69 is offline   Reply With Quote
Old 11-01-2020, 06:13 PM   #10
Registered User
 

Join Date: Nov 2007
Posts: 121
Interested in the frode tel me 07703223951. Cheers any pics of engine and interior. Looks like you've put s larger screen on and moved the seats back cheers Carl
squirrel is offline   Reply With Quote
Old 12-01-2020, 01:04 PM   #11
Registered User
 
hornet's Avatar
 
Country: uk
Location: Hayling island
Boat name: No
Boat make: Phantom 18rs
Engines: Mercury 2.5
Cruising area: solent

Join Date: Mar 2012
Location: Hayling island
Posts: 260
Red sport seats

Hi Simon interested in the red sport seats do you have a picture and price mate? 07854829163 cheers mate 👍
hornet is offline   Reply With Quote
Old 12-01-2020, 10:12 PM   #12
Registered User
 
Silversurfer's Avatar
 
Country: UK
Location: Thorpe Bay
Occupation: IT Director, www.lighthouseit.co.uk
Interests: Boats, Surfing & Snowboarding
Boat name: Isabella / Cool Runnings II / Bella / Sea Pup / Sea Dog / Speedy II / Bernico F3
Boat make: Colvic 35 Suncruiser / Bernico F3 / Phantom 16 / Zodiac 420 YL / RIB / Apollo 9
Engines: 2 x Perkins Sabre 225ti / Mercury Pro XS /Mercury Pro XS 115/ Tohatsu 2.5 / Mercury 25 / Mercury 50
Cruising area: Thames Estuary / River Crouch / Salcombe

Join Date: Jun 2004
Location: Thorpe Bay
Posts: 932
Quote:
Originally Posted by Pennpromo View Post
So having a clear out of various bits as we are moving:
1). Avenger 16 on 2 wheel trailer, Suzuki 115 made to look like a Mercury Blue Band. Good overall cover, painted pale blue Hempel, Mk1 so quite rare. Almost ready to run,lots of new parts, just needs putting together.
2). Avenger 34, hull and deck with fuel tanks and many stainless and other bits. Needs loads of work but hull is sound. Transom cut for TRS drives.
3). Extreme 21 moulds. seen many, many pulls but still very usable.
4). Feline 12ft Minicat on 2 wheel trailer with electric start Merc 25. Carbon deck, polypropylene seats, quite good fun !
5). Honda 225, long shaft ex Cougar 27 race engine, twin Latham steering, helm unit, hoses. Only just over 100 Hrs, low water pickup, gauges, loom etc.
6). Yellow Frode 19, Tandem seats, Yamaha 90, low water pickup, new carbon kevlar seats and upholstery, good 2 wheel trailer, overall cover. Gearbox recently rebuilt by Geoff Purves. 2 props, compass, underfloor fuel tank, small battery. Great little race boat for 3A/B. Ex Vulture Ventures, anti stuff fins, raced by me in 1996. Vented spray rails and notch. Lifting strops etc. Would be perfect with a 115 Promax ...
Most are on Ebay for pictures.
Happy to chat about any of the above and open to sensible offers: 07740 900227. Simon
how much for the Feline 12ft Minicat ? please?
__________________
Loving the Spitfire with a 25HP Mercury
Silversurfer is offline   Reply With Quote
Old 13-01-2020, 08:19 AM   #13
Senior Member
 
Pennpromo's Avatar
 
Country: UK
Location: Christchurch, Dorset
Occupation: Marine Engineer-ish
Interests: Boats, Cars.
Boat name: Splash 4
Boat make: Hunton
Engines: Mercruiser 640
Cruising area: Poole, Solent

Join Date: Feb 2005
Location: Christchurch, Dorset
Posts: 599
Minicat

Hi Silversurfer, looking for £2,500 for the minicat.
Its on eBay:https://www.ebay.co.uk/itm/174120592...84.m1555.l2649
Rather you dealt direct though !
Ran it a few months ago and all OK.
We built it 2 years ago and its only run a few times since. Engine runs well, it planes fine with 2 adults and does over 30 with one person in.
Needs a tiny bit of TLC to make it really nice. Its got a carbon deck and gap hull, lightweight construction with aluminium tubular frameless. Small motorcycle battery, polypropylene moulded waterproof seats.
Sitting on ex Thundercat two wheel Extreme trailer.
Pennpromo is offline   Reply With Quote
Old 13-01-2020, 05:40 PM   #14
Registered User
 

Join Date: Jan 2008
Posts: 333
Quote:
Originally Posted by Pennpromo View Post
I have all sorts of broken Evinrude 250 HO, ex P1 parts, some good some bad.
Saddles, trim units, blocks, looms, electrics.
Various Yamaha 90 parts, inc blocks, reed chests etc.
All sorts of assorted props, I will try to list them all.
Some Greytronics intercoms with old and new style plugs
Deck hatches, skin fittings.
4 X small (5L?) dive bottles with demand valves etc for canopy boats, all as new.
General deck hardware, bilge hose, water hose.
Several Unwin high pressure hydraulic pumps, suitable for drive trim or trim tabs.
Various broken transom lift parts.
Boat cradles, scaffolding.
Open to sensible offers on anything.
Pair of red sporty GRP seats, used but still very usable.
Pair of new and unused black steel framed bucket seats.
A couple of old GPS plotters.
Bouyancy bags, anchors, lines, fenders, pumps etc.
Lots of stainless parts: cleats, rails, U bolts, catches, hinges etc.
Outboard stand, takes 2 mid size engines.
Price and details on the Graytronics intercoms please.
wickedtopspeed is offline   Reply With Quote
Old 14-01-2020, 12:58 PM   #15
Senior Member
 
Pennpromo's Avatar
 
Country: UK
Location: Christchurch, Dorset
Occupation: Marine Engineer-ish
Interests: Boats, Cars.
Boat name: Splash 4
Boat make: Hunton
Engines: Mercruiser 640
Cruising area: Poole, Solent

Join Date: Feb 2005
Location: Christchurch, Dorset
Posts: 599
Volvo D6 350 engines, Gimbals, DPR Drives

Also got a pair of Volvo D6 engines, under 700 hours with some history.
Complete with gimbals, steering, helm, hydraulics, looms, Gauges, pumps etc.
Digital throttles and shifts.
Stainless DPR props.
Pretty much everything you need for a full installation.
Looking for circa £28K all in.
Collection from here in Lymington and we can load them up.
Pennpromo is offline   Reply With Quote
Old 14-01-2020, 07:52 PM   #16
Registered User
 

Join Date: Apr 2019
Posts: 23
Quote:
Originally Posted by Pennpromo View Post
I have all sorts of broken Evinrude 250 HO, ex P1 parts, some good some bad.
Saddles, trim units, blocks, looms, electrics.
Various Yamaha 90 parts, inc blocks, reed chests etc.
All sorts of assorted props, I will try to list them all.
Some Greytronics intercoms with old and new style plugs
Deck hatches, skin fittings.
4 X small (5L?) dive bottles with demand valves etc for canopy boats, all as new.
General deck hardware, bilge hose, water hose.
Several Unwin high pressure hydraulic pumps, suitable for drive trim or trim tabs.
Various broken transom lift parts.
Boat cradles, scaffolding.
Open to sensible offers on anything.
Pair of red sporty GRP seats, used but still very usable.
Pair of new and unused black steel framed bucket seats.
A couple of old GPS plotters.
Bouyancy bags, anchors, lines, fenders, pumps etc.
Lots of stainless parts: cleats, rails, U bolts, catches, hinges etc.
Outboard stand, takes 2 mid size engines.

Any more info on the GPS chartplotters?

Thanks
Jam33 is offline   Reply With Quote
Old 21-01-2020, 11:53 AM   #17
Senior Member
 
Pennpromo's Avatar
 
Country: UK
Location: Christchurch, Dorset
Occupation: Marine Engineer-ish
Interests: Boats, Cars.
Boat name: Splash 4
Boat make: Hunton
Engines: Mercruiser 640
Cruising area: Poole, Solent

Join Date: Feb 2005
Location: Christchurch, Dorset
Posts: 599
Hull Clear Out

So in reply to those who have asked:

1). I will take £100 for the Ring: and help load it up onto your trailer !
2). Red seats, pictures to follow later.
3). Tested the Greytronics and seems to be dead-is ...
4). Plotter fires up but won't pick up a position so now in the skip.
5). Still lots of other bits to list ...
Simon.
Pennpromo is offline   Reply With Quote
Old 21-01-2020, 11:06 PM   #18
Registered User
 
Country: UK
Location: Cheshire
Boat name: No Comment
Engines: Various
Cruising area: North Wales/Merseyside

Join Date: Sep 2016
Location: Cheshire
Posts: 86
Is the avenger 34 still available....???
noodle123 is offline   Reply With Quote
Old 22-01-2020, 08:29 AM   #19
Senior Member
 
Pennpromo's Avatar
 
Country: UK
Location: Christchurch, Dorset
Occupation: Marine Engineer-ish
Interests: Boats, Cars.
Boat name: Splash 4
Boat make: Hunton
Engines: Mercruiser 640
Cruising area: Poole, Solent

Join Date: Feb 2005
Location: Christchurch, Dorset
Posts: 599
Avenger 34

Quote:
Originally Posted by noodle123 View Post
Is the avenger 34 still available....???
Yes, Noodle, its still available, open to an offer on it ...
As you can see it needs work but the hull and deck are very sound !
Attached Thumbnails
Click image for larger version

Name:	IMG_3043.jpg
Views:	172
Size:	118.8 KB
ID:	50900   Click image for larger version

Name:	IMG_3049.jpg
Views:	137
Size:	134.1 KB
ID:	50901   Click image for larger version

Name:	IMG_3054.jpg
Views:	169
Size:	146.1 KB
ID:	50902  
Pennpromo is offline   Reply With Quote
Old 27-01-2020, 08:45 PM   #20
BAD HABIT
 
Frenchbruno's Avatar
 
Country: FRANCE
Interests: speed on water/technics
Boat make: INVADER
Engines: MERC 250XS/SM 1.62
Cruising area: south Britany

Join Date: May 2007
Posts: 562
frodé 19

here on the water

__________________

Frenchbruno is offline   Reply With Quote
Reply

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are Off
Pingbacks are Off
Refbacks are Off


Powered by vBadvanced CMPS v3.2.3

All times are GMT +1. The time now is 05:01 AM.


Powered by vBulletin® Version 3.8.8 Beta 1
Copyright ©2000 - 2024, vBulletin Solutions, Inc.
×