* Surplus to requirements as I got the unit only for the power trim unit it came with and a few other parts - link below shows about 8 images (click)
http://img514.imageshack.us/gal.php?g=gearcase81.jpg
White in colour, will look for part numbers - most likely off a 3 cylinder/ v4 or possibly v6 judging by the size of the power head engine tray - colour this seems to suggest it was a Johnson - measurements are as follows - no cracks on damage on casing or skeg unlike so many, would benefit from repainting however this represents true condition of unit and that it is hiding nothing - with a prop put on the prop shaft everything turns over as it should and pops in and out of gear when moving shift rod - only thins thats missing is the trim tab anode (which should be replaced anyway and a couple of bolts) - there is a thrust washer on the prop shaft in very good order also - also the splines on both shafts are fine and undamaged (pictured)
The propellor pictured in fits on and is 15pitch Mercury alloy prop - this isnt included unless you would like it aswell - I'll let it go for an additional £20 -
measurements: to follow when I find my tape measure!
Not really sure what to ask for ££ wise so offers I guess - thanks
Linear Mode
