Tower of power trim hose and tilt tube wanted

[grumans]

Hi, does anyone have the smaller of the two hydarulic hoses fit an early twin ram trim set up on an inline 6. I also need a tilt/steering tube to fit the same. Thank you in advance

[bigboy]

Do you have the outside diam and width off the tilt tube? I have a tilt tube from a merc which I think might fit.

[grumans]

Thanks for replying. Im afraid I dont its dropped to bits. Any chance you could measure yours and I'll check parts catalogue online ?. Thanks

[born free]

i have a good tilt tube and possibly a hose , will check when back at work tomorrow
cheers

[grumans]

I'm measuring the diameter of what is left at 21.8mm so think 7/8 in old money

[grumans]

Cheers

[Frenchbruno]

for the small hose diameter=
32-45327 - HOSE - Replaced by 32-88005
32-88005 - Hydraulic Hose Assembly
SIERRA = 18-2110 - Power Trim Hose, Small Diameter, 32-88005


for the large hose diameter=
32-45959 - HOSE - Replaced by 32-88006
32-88006 - Hydraulic Hose Assembly
SIERRA= 18-2111 - Power Trim Hose, Large Diameter, 32-88006

the tilt tube reference is=
74528 - Tilt Tube
883067 - Tilt Tube
8M0035074 - TILT TUBE - Replaced by -8M0041936
8M0041936 - Tilt Tube

[grumans]

Thanks for the useful information👌😁

[grumans]

Originally Posted by born free

i have a good tilt tube and possibly a hose , will check when back at work tomorrow
cheers

Hi any joy?

[born free]

Hi , i have one good small hose and a tilt tube which is bad at one end but is usable , have you an email i can send a picture to you ?
cheers John

[grumans]

Hi I have messaged you in here cheers