Wanted stainless prop for a 75hp Johnson

[Nicolasticity]

Wanted a 21 inch pitch prop in stainless steel like an SST for a 1979 Johnson 75hp with the large gear-case and 13 spline prop shaft

763932 Viper with Rubber hub 13 7/8" 21"

763968 Rogue with Rubber hub 4 13" 21"

763954 Raker with Rubber hub 3 13 1/2" 20"

Right hand standard rotation only please and would consider other stainless makes,

thanks

[Red dragon]

Originally Posted by Nicolasticity

Wanted a 21 inch pitch prop in stainless steel like an SST for a 1979 Johnson 75hp with the large gear-case and 13 spline prop shaft

763932 Viper with Rubber hub 13 7/8" 21"

763968 Rogue with Rubber hub 4 13" 21"

763954 Raker with Rubber hub 3 13 1/2" 20"

Right hand standard rotation only please and would consider other stainless makes,

thanks

Steel developments have a few in the reconditioned prop section

[Nicolasticity]

Good call but none at near right pitch thanks

[Red dragon]

I can see 2

13 spline and 21p

4 1/4 gearcase?

[Red dragon]

http://www.steeldevelopments.net/rec...-50-150hp.html

[Nicolasticity]

Originally Posted by Red dragon

I can see 2

13 spline and 21p

4 1/4 gearcase?

Got it - the Suzuki props fit OMC - didnt think about that. Are all the Suzuki features ie spline height, thrust washer and splined washer size identical also?

[Red dragon]

Originally Posted by Nicolasticity

Got it - the Suzuki props fit OMC - didnt think about that. Are all the Suzuki features ie spline height, thrust washer and splined washer size identical also?

i believe the suzuki gearcase is slightly different but if you fabricated the right size thrust washer sure it would work..13 spline should fit on 13 spline.. Like yams on mercs etc..

I have ran a prop off that list and it was good quality.

What's it pushing?

[Nicolasticity]

VENOM - the 1974 Class 4B Championship winning 14ft Concorde. Won its class with a 4 cylinder Merc.

Brought it from Lyn Dudley in Milford in 1976 - fab boat too good to let go.

[Red dragon]

Good to hear people are still keep the old ones alive..

[Cream Marine]

March 01st is when my new stock gets in. I can do a Ballistic 13-3/8 x 21P on 13 spline and 4-1/4" gearcase. the XHS kit is a x206 or x206s (if you want a solid hub).