phantompete
Junior Member
- Joined
- Dec 10, 2015
- Messages
- 5
- Location
- loch lomond
- Cruising area
- loch lomond & the solway firth
- Boat make
- p20 yam 200,VS22 yam 150trp,Dart 18
- Engines(s)
- Yam proV 200,Yam Vmax 150 trp
I fitted new set to of these to my 6.2 last year. Today the engine wouldn't turn. Pulled the plugs out and all 4 starboard cylinders
were full of water. Took the exhaust manifold and riser off and its clearly had water in it. Engine has only done 140 hours
and is clean as a whistle. Freshwater boat kept on the trailer and only used 1 week a year in the sea. Engine oil is like new and I always
drain it out properly over the winter. No obvious signs of failure with the manifold or riser. They are the dry type to be clear.
were full of water. Took the exhaust manifold and riser off and its clearly had water in it. Engine has only done 140 hours
and is clean as a whistle. Freshwater boat kept on the trailer and only used 1 week a year in the sea. Engine oil is like new and I always
drain it out properly over the winter. No obvious signs of failure with the manifold or riser. They are the dry type to be clear.
