Flo coating interior of P21

[nick1]

I am just getting rid of the carpet in my p21 and am going to flo coat it,what sort of prep does the glass fibre need before painting i.e how flat and also how can i get a non slip kind of finish,one more how many kg will i need on a 21.
Thanks in advance.

 

[Hydrostream]

36 grit in a grinder and knock all the crap and old carpet adhesive off, get it reasonably flat, wipe down with acetone.

Lots of ways to do non slip, easiest way is probably international deck paint or mix grip particles in some 2 pack with matting agent.

8 kilos should see you right, doing floor sides and up front as far as the foot board, if you roll it. A lot less if you spray it.

 

[Ph@ntastic]

After is discoverd my fueltank was shot i removed my floor te get the old one out , after the repairs i finished the floor using double coat .
I used 2can's off dd-coating from de ijssel , trew in some black chips/flakes when the second layer was still wet and finished it of with one layer of clearcoat .
The result is an semi non slip floor (no slips so far )