Oliver.Ashworth
Member
- Joined
- Oct 6, 2010
- Messages
- 97
- Cruising area
- Channel Islands
- Boat name
- Lets Tango
- Boat make
- Phantom 21
- Engines(s)
- Merc 200
Hi All,
Am moving to a different class for next season so need to clear some space for the next load of spares..
Various items for sale as pictured, please PM for postage costs, more info etc. Happy to sell parts individually but also willing to put it all onto a pallet if anyone's keen
Please bear in mind that all these parts are in Guernsey, so VAT will have to be paid for items going into the UK.
1. Genuine Mercury alien cowling in poor condition. (bottom tray is very good but will need a re-spray). Rim of top cowling has chipped away where it has come loose during racing. Catches etc all good usable- £100
2. Mariner/ Mercury cowl set (one piece- not clamshell). Lower trays not matching but would spray up nicely- £100
3. Two Mercury/ Mariner 20" mid sections in good condition - £50 each
4. Two piece sandwich plate in good order - £25
5. One piece 2L sandwich plate in good condition- £125
6. Mercury saddle with trim pump- have never tested but looks to be all there- £95
7. Mariner saddle (in parts) with disassembled trim pump, will probably need a new motor for the pump - £45
8. Mercury stator, 2x ignition switches and idle control module - £95
9. One coil and selection of used HT leads - £15
10. Set of used four petal reeds (I think Chris Carson) in good condition - £50
11. Set of unused (but not in original packaging) Boyesen reeds (7 petal)- £70
12. Early 20" CLE lower unit. Casing is excellent but forward gear shredded. Comes with bearing carrier and various spare bearings & seals. Easily rebuild-able with new forward gear - £150
13. 20" lower unit with broken prop shaft and bearing carrier (carrier shattered when trying to remove) - £50
14. 2x V6 air inlet baffles- £10 ea
15. Box of various used v6 mounts and bolts some rubber, some solid - £20
16. V6 clamshell rear centre piece (hinge panel) - £15
17. Bob's bigfoot dual hose nose cone kit (brand new, unused) - £100
18. Worked (thinned) QSS 23" chopper in fair order - £110
19. QSS 24" cleaver, has had a blade tip repair at some point. Usable but not perfect - £95
20. Box of assorted v6 water pumps- bodies, gaskets, plates, impellers etc -£30
21. Used fuel filter housing - £5
22. 2.5L 200 exhaust tuner - £15
23. V6 offshore saddle bottom anode in good condition - £15
24. Two 20" gear selector rods £15 ea
Am moving to a different class for next season so need to clear some space for the next load of spares..
Various items for sale as pictured, please PM for postage costs, more info etc. Happy to sell parts individually but also willing to put it all onto a pallet if anyone's keen
Please bear in mind that all these parts are in Guernsey, so VAT will have to be paid for items going into the UK.
1. Genuine Mercury alien cowling in poor condition. (bottom tray is very good but will need a re-spray). Rim of top cowling has chipped away where it has come loose during racing. Catches etc all good usable- £100
2. Mariner/ Mercury cowl set (one piece- not clamshell). Lower trays not matching but would spray up nicely- £100
3. Two Mercury/ Mariner 20" mid sections in good condition - £50 each
4. Two piece sandwich plate in good order - £25
5. One piece 2L sandwich plate in good condition- £125
6. Mercury saddle with trim pump- have never tested but looks to be all there- £95
7. Mariner saddle (in parts) with disassembled trim pump, will probably need a new motor for the pump - £45
8. Mercury stator, 2x ignition switches and idle control module - £95
9. One coil and selection of used HT leads - £15
10. Set of used four petal reeds (I think Chris Carson) in good condition - £50
11. Set of unused (but not in original packaging) Boyesen reeds (7 petal)- £70
12. Early 20" CLE lower unit. Casing is excellent but forward gear shredded. Comes with bearing carrier and various spare bearings & seals. Easily rebuild-able with new forward gear - £150
13. 20" lower unit with broken prop shaft and bearing carrier (carrier shattered when trying to remove) - £50
14. 2x V6 air inlet baffles- £10 ea
15. Box of various used v6 mounts and bolts some rubber, some solid - £20
16. V6 clamshell rear centre piece (hinge panel) - £15
17. Bob's bigfoot dual hose nose cone kit (brand new, unused) - £100
18. Worked (thinned) QSS 23" chopper in fair order - £110
19. QSS 24" cleaver, has had a blade tip repair at some point. Usable but not perfect - £95
20. Box of assorted v6 water pumps- bodies, gaskets, plates, impellers etc -£30
21. Used fuel filter housing - £5
22. 2.5L 200 exhaust tuner - £15
23. V6 offshore saddle bottom anode in good condition - £15
24. Two 20" gear selector rods £15 ea
