Hull Clear Out !

Pennpromo

Senior member
Joined
Feb 22, 2005
Messages
599
Location
Christchurch, Dorset
Cruising area
Poole, Solent
Boat name
Splash 4
Boat make
Hunton
Engines(s)
Mercruiser 640
So having a clear out of various bits as we are moving:
1). Avenger 16 on 2 wheel trailer, Suzuki 115 made to look like a Mercury Blue Band. Good overall cover, painted pale blue Hempel, Mk1 so quite rare. Almost ready to run,lots of new parts, just needs putting together.
2). Avenger 34, hull and deck with fuel tanks and many stainless and other bits. Needs loads of work but hull is sound. Transom cut for TRS drives.
3). Extreme 21 moulds. seen many, many pulls but still very usable.
4). Feline 12ft Minicat on 2 wheel trailer with electric start Merc 25. Carbon deck, polypropylene seats, quite good fun !
5). Honda 225, long shaft ex Cougar 27 race engine, twin Latham steering, helm unit, hoses. Only just over 100 Hrs, low water pickup, gauges, loom etc.
6). Yellow Frode 19, Tandem seats, Yamaha 90, low water pickup, new carbon kevlar seats and upholstery, good 2 wheel trailer, overall cover. Gearbox recently rebuilt by Geoff Purves. 2 props, compass, underfloor fuel tank, small battery. Great little race boat for 3A/B. Ex Vulture Ventures, anti stuff fins, raced by me in 1996. Vented spray rails and notch. Lifting strops etc. Would be perfect with a 115 Promax ...
Most are on Ebay for pictures.
Happy to chat about any of the above and open to sensible offers: 07740 900227. Simon
 
More stuff !

I also have lots of unused composite materials.
Carbon twill fabric.
Heavy Carbon mat
Kevlar Unidirectional
Carbon Unidirectional
Lots of 300 and 600 CSM
Lots of 2/3/4/5 MM core material.
Loads of Nomex honeycomb offcuts in various shapes and sizes.
2 X freezers full of pre-preg carbon which is out of date but perfectly usable, cures at 80 degrees.
 
Motors etc.

I have all sorts of broken Evinrude 250 HO, ex P1 parts, some good some bad.
Saddles, trim units, blocks, looms, electrics.
Various Yamaha 90 parts, inc blocks, reed chests etc.
All sorts of assorted props, I will try to list them all.
Some Greytronics intercoms with old and new style plugs
Deck hatches, skin fittings.
4 X small (5L?) dive bottles with demand valves etc for canopy boats, all as new.
General deck hardware, bilge hose, water hose.
Several Unwin high pressure hydraulic pumps, suitable for drive trim or trim tabs.
Various broken transom lift parts.
Boat cradles, scaffolding.
Open to sensible offers on anything.
Pair of red sporty GRP seats, used but still very usable.
Pair of new and unused black steel framed bucket seats.
A couple of old GPS plotters.
Bouyancy bags, anchors, lines, fenders, pumps etc.
Lots of stainless parts: cleats, rails, U bolts, catches, hinges etc.
Outboard stand, takes 2 mid size engines.
 
Interested

Hi mate
Could you send me pics / details / prices please of frode and feline cat .
Cheers Reece To rfpyne@hotmail.co.uk
 
Last edited:
Pictures

Frode and minicar pictures.
Frode now has Bob's nosecone on it after big rebuild last summer..
Simon.
 

Attachments

  • IMG_0790.jpg
    IMG_0790.jpg
    121.5 KB · Views: 384
  • IMG_0791.jpg
    IMG_0791.jpg
    132.6 KB · Views: 238
  • IMG_0804.jpg
    IMG_0804.jpg
    92.6 KB · Views: 262
  • IMG_8678.jpg
    IMG_8678.jpg
    113.7 KB · Views: 246
Ring 20C

Just found a Ring 20C, it needs a new transom, we dug it out and have never finished it.
It was sanded down to paint, seems pretty sound elsewhere.
Boat only, no trailer.
£250 or offers.
 

Attachments

  • IMG_3308.jpg
    IMG_3308.jpg
    108.1 KB · Views: 246
  • IMG_3309.jpg
    IMG_3309.jpg
    75.3 KB · Views: 253
  • IMG_3310.jpg
    IMG_3310.jpg
    83.3 KB · Views: 201
  • IMG_3311.jpg
    IMG_3311.jpg
    86.7 KB · Views: 192
More Pics

More pictures of the Frode.
 

Attachments

  • IMG_2590.jpg
    IMG_2590.jpg
    58.3 KB · Views: 200
  • 988404_734870096553853_1154194634_n-2.jpg
    988404_734870096553853_1154194634_n-2.jpg
    74.3 KB · Views: 305
Have you checked your loft out you might have another boat up there
 
Interested in the frode tel me 07703223951. Cheers any pics of engine and interior. Looks like you've put s larger screen on and moved the seats back cheers Carl
 
Red sport seats

Hi Simon interested in the red sport seats do you have a picture and price mate? 07854829163 cheers mate ?
 
So having a clear out of various bits as we are moving:
1). Avenger 16 on 2 wheel trailer, Suzuki 115 made to look like a Mercury Blue Band. Good overall cover, painted pale blue Hempel, Mk1 so quite rare. Almost ready to run,lots of new parts, just needs putting together.
2). Avenger 34, hull and deck with fuel tanks and many stainless and other bits. Needs loads of work but hull is sound. Transom cut for TRS drives.
3). Extreme 21 moulds. seen many, many pulls but still very usable.
4). Feline 12ft Minicat on 2 wheel trailer with electric start Merc 25. Carbon deck, polypropylene seats, quite good fun !
5). Honda 225, long shaft ex Cougar 27 race engine, twin Latham steering, helm unit, hoses. Only just over 100 Hrs, low water pickup, gauges, loom etc.
6). Yellow Frode 19, Tandem seats, Yamaha 90, low water pickup, new carbon kevlar seats and upholstery, good 2 wheel trailer, overall cover. Gearbox recently rebuilt by Geoff Purves. 2 props, compass, underfloor fuel tank, small battery. Great little race boat for 3A/B. Ex Vulture Ventures, anti stuff fins, raced by me in 1996. Vented spray rails and notch. Lifting strops etc. Would be perfect with a 115 Promax ...
Most are on Ebay for pictures.
Happy to chat about any of the above and open to sensible offers: 07740 900227. Simon

how much for the Feline 12ft Minicat ? please?
 
Minicat

Hi Silversurfer, looking for £2,500 for the minicat.
Its on eBay:https://www.ebay.co.uk/itm/174120592017?ssPageName=STRK:MESELX:IT&_trksid=p3984.m1555.l2649
Rather you dealt direct though !
Ran it a few months ago and all OK.
We built it 2 years ago and its only run a few times since. Engine runs well, it planes fine with 2 adults and does over 30 with one person in.
Needs a tiny bit of TLC to make it really nice. Its got a carbon deck and gap hull, lightweight construction with aluminium tubular frameless. Small motorcycle battery, polypropylene moulded waterproof seats.
Sitting on ex Thundercat two wheel Extreme trailer.
 
I have all sorts of broken Evinrude 250 HO, ex P1 parts, some good some bad.
Saddles, trim units, blocks, looms, electrics.
Various Yamaha 90 parts, inc blocks, reed chests etc.
All sorts of assorted props, I will try to list them all.
Some Greytronics intercoms with old and new style plugs
Deck hatches, skin fittings.
4 X small (5L?) dive bottles with demand valves etc for canopy boats, all as new.
General deck hardware, bilge hose, water hose.
Several Unwin high pressure hydraulic pumps, suitable for drive trim or trim tabs.
Various broken transom lift parts.
Boat cradles, scaffolding.
Open to sensible offers on anything.
Pair of red sporty GRP seats, used but still very usable.
Pair of new and unused black steel framed bucket seats.
A couple of old GPS plotters.
Bouyancy bags, anchors, lines, fenders, pumps etc.
Lots of stainless parts: cleats, rails, U bolts, catches, hinges etc.
Outboard stand, takes 2 mid size engines.

Price and details on the Graytronics intercoms please.
 
Volvo D6 350 engines, Gimbals, DPR Drives

Also got a pair of Volvo D6 engines, under 700 hours with some history.
Complete with gimbals, steering, helm, hydraulics, looms, Gauges, pumps etc.
Digital throttles and shifts.
Stainless DPR props.
Pretty much everything you need for a full installation.
Looking for circa £28K all in.
Collection from here in Lymington and we can load them up.
 
I have all sorts of broken Evinrude 250 HO, ex P1 parts, some good some bad.
Saddles, trim units, blocks, looms, electrics.
Various Yamaha 90 parts, inc blocks, reed chests etc.
All sorts of assorted props, I will try to list them all.
Some Greytronics intercoms with old and new style plugs
Deck hatches, skin fittings.
4 X small (5L?) dive bottles with demand valves etc for canopy boats, all as new.
General deck hardware, bilge hose, water hose.
Several Unwin high pressure hydraulic pumps, suitable for drive trim or trim tabs.
Various broken transom lift parts.
Boat cradles, scaffolding.
Open to sensible offers on anything.
Pair of red sporty GRP seats, used but still very usable.
Pair of new and unused black steel framed bucket seats.
A couple of old GPS plotters.
Bouyancy bags, anchors, lines, fenders, pumps etc.
Lots of stainless parts: cleats, rails, U bolts, catches, hinges etc.
Outboard stand, takes 2 mid size engines.


Any more info on the GPS chartplotters?

Thanks
 
Hull Clear Out

So in reply to those who have asked:

1). I will take £100 for the Ring: and help load it up onto your trailer !
2). Red seats, pictures to follow later.
3). Tested the Greytronics and seems to be dead-is ...
4). Plotter fires up but won't pick up a position so now in the skip.
5). Still lots of other bits to list ...
Simon.
 
Is the avenger 34 still available....???
 
Avenger 34

Is the avenger 34 still available....???

Yes, Noodle, its still available, open to an offer on it ...
As you can see it needs work but the hull and deck are very sound !
 

Attachments

  • IMG_3043.jpg
    IMG_3043.jpg
    118.8 KB · Views: 236
  • IMG_3049.jpg
    IMG_3049.jpg
    134.1 KB · Views: 184
  • IMG_3054.jpg
    IMG_3054.jpg
    146.1 KB · Views: 212
frodé 19

here on the water

 
Last edited:

Latest posts

Back
Top