s6

kitten

Senior member
Joined
Mar 12, 2004
Messages
556
Location
devon
T's here:hugegrin:
 

Attachments

  • Untitled-1 copy.jpg
    Untitled-1 copy.jpg
    241.9 KB · Views: 287
  • Untitled-2 copy.jpg
    Untitled-2 copy.jpg
    179.1 KB · Views: 369
:banana: :shag: :banana:
 
WOW that is stunning...............must have cost a fortune !! what you going to put it on m8??:up:
 
Im sure some people **** tenners! How much is one of them?
 

Attachments

  • s6.JPG
    s6.JPG
    76.2 KB · Views: 355
MHz drive

200 quid I believe, plus the usual postage, vat etc.
 
The real beauty of this thing is that the engines are not pointing down towards the stern, and no bending flexi drive tubing with all the problems that causes.
The engines are mounted flat with a solid rod drive shaft. A bit expensive but it just makes everything better and it looks the 'dogs'.
 
The real beauty of this thing is that the engines are not pointing down towards the stern, and no bending flexi drive tubing with all the problems that causes.
The engines are mounted flat with a solid rod drive shaft. A bit expensive but it just makes everything better and it looks the 'dogs'.

Sorry Rob, but you still have to use a flex drive (as they use the flex for steering and trim so tight corners are out) and put a bit of bend in it to stop it oscilating in the tube.
Does look the dogs though and you can get servo cotrolled trim using a flex drive and quad start threaded plunger.:up:
I'll let you know if it lasts any longer than the RCM pile of poo.:hatchet:
 
wot you doing up at 4am you oul fool?
 
Sorry Rob, but you still have to use a flex drive (as they use the flex for steering and trim so tight corners are out) and put a bit of bend in it to stop it oscilating in the tube.
Does look the dogs though and you can get servo cotrolled trim using a flex drive and quad start threaded plunger.:up:
I'll let you know if it lasts any longer than the RCM pile of poo.:hatchet:


Mmm Kitten it looks a solid drive to me?
 

Attachments

  • Mj24652[2].jpg
    Mj24652[2].jpg
    98.5 KB · Views: 354
MMMM rob looks like too few pixels to me you should work in CCTV no criminal would be safe.
I have just fitted one of these drives and trust me it is flex.


Fuller I was up having nightmares about TREES!!!
 

Attachments

  • shaft.jpg
    shaft.jpg
    30.8 KB · Views: 247
What boat are you fitting that drive to Kitten?
 
nope, a Dart30 (apparently) see this thread.
And before any one says OOHHHH It's a splash of a moon rocket 40305 built by Jim Snodgrass in 1874 look at these.:hugegrin:
 

Attachments

  • laid out.jpg
    laid out.jpg
    48.1 KB · Views: 264
  • fill.jpg
    fill.jpg
    57.9 KB · Views: 278
  • hull.jpg
    hull.jpg
    21.9 KB · Views: 324
Cool…
Are the templates CNC cut? :hugegrin:
 

Latest posts

Back
Top