Ski poles

[Dan]

If any of you are after a standard straight ski pole (around 1300mm but can go longer), I`m doing some at the mo. Finished in mirror polished stainless, with all the brackets etc etc £60 inc carriage. Drop me a PM if needed

 

[darexms]

What diameter are they and what type of fittings do they come with?

Any pics?

 

[Dan]

Finished in 40mm polished stainless, although can go to whatever di you need. Fits into a U secton that you fix to the floor, which has a pin going though both it and the pole. Laser cut plate to go on top of the fibre glass to take the strain. I`ll try and take a pic tonight of my one.
Cheers
Dan

 

[darexms]

Sounds good to me, look forward to seeing the pics!

 

[Dan]

This is my one which I`ve had for years (hence all the dirt!)

 

[Dan]

And the base. This U section was originally done from ali, but I`ve changed that to stainless. Simply remove the pin at the base and out comes the pole, so your all over cover will still fit.

 

[darexms]

I need to take some measurements when the first hull and deck is bonded together next week, is there a deal to be had for 3 poles and fitings?

 

[Lars T]

Include me into the deal
that's 4 poles in total then..

 

[Dan]

darexms,
I will be able to do something, just let me know the finished length that you require.
Lars,
I will post the pictures direct to your email.

Cheers

 

[Jon]

Dan,

Are they suitable for pole dancers?

 

[darexms]

darexms,
I will be able to do something, just let me know the finished length that you require.
Lars,
I will post the pictures direct to your email.

Cheers

Cheers

I'll be in contact next week

 

[Dan]

Dan,

Are they suitable for pole dancers?

I guess so, if your into midget dancers they should be fine!!!
(could be painful though with the T peice crossed top)

 

[Lars T]

Dan - how long should a ski-pole be?? or do i have to measure from the bottom of the boat to the top of the engine?

anyone with a Phantom 21 or 20 - how high/long is your ski-pole?

 

[eyeye]

I guess so, if your into midget dancers they should be fine!!!

Garfish.

 

[Lars T]

No probs dancing my pole...!!

anyway just measure the height needed to clear my enigne around 1250mm so i guess something around 1300mm will do..

Dan here's my PO:

1 pole please

 

[Dan]

Got 2 left of this batch if anyones interested.
£60inc carriage