Wanted mercury drive shafts

[maz928]

I after a 15" and 20" mercury v6 drive shafts ....anyone

Steve

 

[boats]

Hi I have a 20 inch shaft.
Pm sent

 

[Sam1cats]

If you know the overall length of a 15 inch shaft Then I have the Tall to recut Splines on the shafts .And I also have some shafts to do This I think I'm the only person that can do this job As I had a special tall made .It is better than Chopping and welding

 

[maz928]

If you know the overall length of a 15 inch shaft Then I have the Tall to recut Splines on the shafts .And I also have some shafts to do This I think I'm the only person that can do this job As I had a special tall made .It is better than Chopping and welding

Hi Sam

Is it possible to cut and re spline the shaft without stripping the box ie:convert a 20"or 25"box to a 15" box.

Steve

 

[Sam1cats]

Yes you do not need to Strip the gearbox it can be done in Place Just need to know the Length of Shaft Or you Cut and I spline it For you

 

[Sam1cats]

Just thought I'd mention it can only be done to a stainless shaft So if your shaft is rusty it is a hardened shaft Which I cannot do

 

[Petrol-Head]

Recut drive shaft Splines

If you know the overall length of a 15 inch shaft Then I have the Tall to recut Splines on the shafts .And I also have some shafts to do This I think I'm the only person that can do this job As I had a special tall made .It is better than Chopping and welding

Hi, I also have the tools to recut Splines on shafts, and I am able to recut the shaft when it is fitted to the gearbox or not.

Cheers

 

[Coronet Kip]

Hi, I also have the tools to recut Splines on shafts, and I am able to recut the shaft when it is fitted to the gearbox or not.

Cheers