The seastar Pro 2.0 Helm,20ft 1500psi Kevlar hoses system is a year old and retails at over £1000 now. (Hypro Marine) and with Unipart Marine over £1500!!!!!!
I will accept offers around £550
The Lifter is a stainless polished copy/converted CMC one Very strong (the alu ones where prone to breaking) It has the inboard pump all working But does need a new Nut sourcing or machining on the lower of the ram. It still works fine as gravity brings it down nicely
Approx 8 inch lift 5 inch set back approx 20 KG's £350
The protrim stalks are provisionally sold along with the engine,fuel pump,Bow tank parts.
The stainless marine Trim gauge with LCD 8 digit readout and engine actuator (will work R or L handed on Yamaha V4/6 and Merc Offshore/std Mids. i will sell for offers around £250
I will be looking for around £1500
for the hull and twin axle trailer (new wheels and tyres, bearings a year ago) inc stainless rail,cleats,lifting eyes,180 Litre fuel tank,twin electric bilge pumps,twin manual pumps stainless transom plate/tie bars cockpit cover etc..
"Argon Weld" Stand alone Aluminum foot throttle inc TFX extreme cable £100
Hypro Marine steering wheel needs a polish£45
Sparco Pro 2000 Marine vinyl seats just over a year old (Some vinyl damage..easy stitch repairs) £275 Pair
Yamaha digital Multi function rev counter 9999rpm £120
Yamaha Digital speedo 99mph £100
80 Gallon (Ish) Bow tank in aluminum £150
Varley red top 20 gel battery £75
(1 Year old)