Hi,
Since the Activator Project is good enough to put time and energy in I came up to we going to let the moulds and rights for the Lovely Arrow 830 go to A Another builder. As may some knows the Arrow has it's roots in Magnum Marine 27 Sport. The Arrow has a wented pad/running Surface and the cock pit is moved back 1ft from the original Magnum Marine 27 Sport.
It's a fast hull and very good rough water boat. Speed with a stock 496/425 is about 65 knots. The boat would also be great with outboards.
- two part hull mould
- deck mould flat deck - only 2 deck made since new
- deck mould tall deck - only 3 deck made snice new
- Engine hatch moulds, flusched and rised
- Lots of other moulds like rear bench, side inserts etc etc etc
- Bulkhead templates - some made of masonite - but some only of corrugated
Moulds need a good buff and shine.
Moulds are located outside Stockholm Sweden and two bigger pickups with trailers or a truck will make the job to pick them up. I can put buyer in Contact with A good transport Company if needed.
OBS!!!!! Only serious buyers please. OBS!!!!!
Price? Yes - there's a price - but if that's the main question you are the wrong guy
For Company registrated for VAT - our price can be less VAT.
Thanks
Mange