offshore leg

[Jon Fuller]

Originally posted by roofer
I reckon its a 20", this is a 15"

yeah, different ram, and joint tween mid and lower looks farther up the saddle, ...agree

+, the lower mount on roofers, looks like the one on the scream & fly pic.

[Gav]

Originally posted by Jon Fuller
OK, they're not a pair, the other one (from same seller) is a regular domestic leg, and the lower mount looks lower on comarison to the sadle, so I reckon MrRob is right.

a domestic leg with an offshore sadle by the looks of it.... promax??

[Jon Fuller]

Originally posted by Gav
a domestic leg with an offshore sadle by the looks of it.... promax??

could be, or just a 'bitsa'

[Gav]

Originally posted by Jon Fuller
could be, or just a 'bitsa'

mmm possibly, but mrrobs promax is a domestic mid with offshore saddle

[Jon Fuller]

yeah, so is TD's, i'm just saying it could also have been put together by someone outa bits

[Captain Chaos]

Originally posted by Jon Fuller
these look shorter tho', and no large ram!

These bad-boys were destined for a P25

i'd love to have seen that all rigged and raring to go

[MrRob]

Originally posted by Gav
mmm possibly, but mrrobs promax is a domestic mid with offshore saddle

Thats right! Or so I believe/have been told.

[Gav]

Originally posted by Jon Fuller
yeah, so is TD's, i'm just saying it could also have been put together by someone outa bits

agreed!

[JamesM]

It's 100% definatly no doubt in my mind whatsoever a 20".

The 20" comes with the long trim and tilt ram and the 15" comes with the short trim only ram. However the 15" mid can acomodate either ram and so many people fit the long ram to the 15" mid as the short trim only ram can make launching/recovering a real pain. The Short ram was used to reduce/stop bounce and so is the preffered choice for pure racing applications.

The transom brackets are the correct offshore type and so is the tiller arm. Therefore althought I can't see the swivel bracket in that photo I would have thought it would also be the offshore type. Besides I'm pretty sure that the offshore tiller only fits in the offshore swivel bracket.

So to conclude it looks to me like a proper complete early to mid 90's 20" offshore midsection that would benefit from a lick of paint. Bear in mind it may also need rebushing.

Get bidding dudes

[hutchy]

looks like old 2.4 mod vp leg and saddle

[JamesM]

Originally posted by hutchy
looks like old 2.4 mod vp leg and saddle

Its definately the newer 2.5OS/XR2 early to mid 90's style. Same as Gavs shown earlier in this thread.

[Jon Fuller]

Originally posted by Captain Chaos
i'd love to have seen that all rigged and raring to go

Here's a not too good pic of the boat covered up at Steves workshop, and a short snippet ov vid showing it.

vid of P25

[Gav]

Originally posted by Jon Fuller
Here's a not too good pic of the boat covered up at Steves workshop, and a short snippet ov vid showing it.vid of P25

black?? huh who would have a black boat i ask ye!

[MrRob]

Originally posted by Gav
black?? huh who would have a black boat i ask ye!

A boat builder!

[JamesM]

Bid on that offshore mid yet nobba?

[Jon Fuller]

Originally posted by MrRob
A boat builder!

'A' being the opperative word, there's only one!

[Gav]

Originally posted by Jon Fuller
'A' being the opperative word, there's only one!

how very cutting .............thanx!!

[MrRob]

Originally posted by Jon Fuller
'A' being the opperative word, there's only one!

As in 'A' boat or 'A' Builder? Either way its false

[Jon Fuller]

No blubbin you! i'm only mekkin up for all the times you've 'savaged' me!

[Jon Fuller]

Originally posted by MrRob
As in 'A' boat or 'A' Builder? Either way its false

Neither!

As in, there's only 'one' builder who'd build himself a black boat!